Class surface_properties
In: surface_properties/surface_properties.f90

惑星表面特性の設定

Setting planetary surface properties

Note that Japanese and English are described in parallel.

海面温度や地表面諸量を設定します.

Data about sea surface temperature (SST) or various values on surface are set.

Procedures List

SetSurfaceProperties :惑星表面特性の設定
———— :————
SetSurfaceProperties :Setting surface properties

NAMELIST

NAMELIST#surface_properties_nml

Methods

Included Modules

dc_types dc_message gtool_history gridset dc_string gtool_historyauto read_time_series timeset surface_data gabls albedo_Matthews Bucket_Model modify_albedo_snowseaice surface_properties_lo roughlen_Matthews soil_thermdiffcoef snowice_frac dc_iounit namelist_util

Public Instance methods

Subroutine :
xy_SurfMajCompIceB(0:imax-1, 1:jmax) :real(DP), intent(in ), optional
: $ M_mcs (t-\Delta t) $ . Surface major component ice amount (kg m-2)
xy_SoilMoistB(0:imax-1, 1:jmax) :real(DP), intent(in ), optional
: $ M_ws (t-\Delta t) $ . 土壌水分 (kg m-2) Soil moisture (kg m-2)
xy_SurfSnowB(0:imax-1, 1:jmax) :real(DP), intent(in ), optional
: $ M_ss (t-\Delta t) $ . 積雪量 (kg m-2) Surface snow amount (kg m-2)
xy_SurfTemp(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表面温度. Surface temperature
xy_SurfAlbedo(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表アルベド. Surface albedo
xy_SurfHumidCoef(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表湿潤度. Surface humidity coefficient
xy_SurfRoughLenMom(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表粗度長. Surface rough length for momentum
xy_SurfRoughLenHeat(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表粗度長. Surface rough length for heat
xy_SurfHeatCapacity(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地表熱容量. Surface heat capacity
xy_DeepSubSurfHeatFlux(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: 地中熱フラックス. "Deep subsurface heat flux" Heat flux at the bottom of surface/soil layer.
xy_SurfCond(0:imax-1, 1:jmax) :integer , intent(inout), optional
: 惑星表面状態 (0: 固定, 1: 可変). Surface condition (0: fixed, 1: variable)
xy_SurfType(0:imax-1, 1:jmax) :integer , intent(inout), optional
: 惑星表面タイプ (土地利用) Surface type (land use)
xy_SurfHeight(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: $ z_s $ . 地表面高度. Surface height.
xy_SurfHeightStd(0:imax-1, 1:jmax) :real(DP), intent(inout), optional
: $ z_s $ . 地表面高度. Surface height.
xy_SeaIceConc(0:imax-1,1:jmax) :real(DP), intent(inout), optional
: 海氷密度 (0 <= xy_SeaIceConc <= 1) Sea ice concentration (0 <= xy_SeaIceConc <= 1)
xy_SoilHeatCap(0:imax-1,1:jmax) :real(DP), intent(inout), optional
: 土壌熱容量 (J K-1 kg-1) Specific heat of soil (J K-1 kg-1)
xy_SoilHeatDiffCoef(0:imax-1,1:jmax) :real(DP), intent(inout), optional
: 土壌熱伝導率 (W m-1 K-1) Heat conduction coefficient of soil (W m-1 K-1)

惑星表面特性を設定します.

Set surface properties.

[Source]

  subroutine SetSurfaceProperties( xy_SurfMajCompIceB, xy_SoilMoistB, xy_SurfSnowB, xy_SurfTemp, xy_SurfAlbedo, xy_SurfHumidCoef, xy_SurfRoughLenMom, xy_SurfRoughLenHeat, xy_SurfHeatCapacity, xy_DeepSubSurfHeatFlux, xy_SurfCond, xy_SurfType, xy_SurfHeight, xy_SurfHeightStd, xy_SeaIceConc, xy_SoilHeatCap, xy_SoilHeatDiffCoef )
    !
    ! 惑星表面特性を設定します. 
    !
    ! Set surface properties. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: toChar

    ! gtool4 データ入力
    ! Gtool4 data input
    !
    use gtool_history, only: HistoryGet

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoPut

    ! 時系列データの読み込み
    ! Reading time series
    !
    use read_time_series, only: SetValuesFromTimeSeriesWrapper

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, EndTime, TimesetClockStart, TimesetClockStop

    ! 地表面データ提供
    ! Prepare surface data
    !
    use surface_data, only: SetSurfData

    !
    ! Routines for GABLS tests
    !
    use gabls, only : SetGabls2SurfTemp

    ! Matthews のデータに基づく惑星表面アルベド設定
    ! set surface albedo based on data by Matthews
    !
    use albedo_Matthews, only: SetAlbedoMatthews, ModAlbedoMatthewsCultivation

    ! バケツモデル
    ! Bucket model
    !
    use Bucket_Model, only : BucketSetFlagOceanFromMatthews, BucketModHumidCoef

    ! 雪と海氷によるアルベド変化
    ! modification of surface albedo on the snow covered ground and on the sea ice
    !
    use modify_albedo_snowseaice, only: ModAlbedoDueToSnowSeaIce

    ! アルベド, 粗度長の設定, 陸面と海洋の差のみ考慮
    ! Set albedo and roughness length, only considering land-ocean contrast
    !
    use surface_properties_lo, only: SetAlbedoLO, SetRoughLenLO

    ! Matthews のデータに基づく地面粗度の設定
    ! set roughness length on land surface based on data by Matthews
    !
    use roughlen_Matthews, only: SetRoughLenLandMatthews, ModRoughLenMatthewsCultivation

    ! 土壌熱伝導係数の設定
    ! set soil thermal diffusion coefficient
    !
    use soil_thermdiffcoef, only : SetSoilThermDiffCoefSimple

    ! 雪, 氷の割合
    ! snow/ice fraction
    !
    use snowice_frac, only : SeaIceAboveThreshold

    ! 宣言文 ; Declaration statements
    !
    real(DP), intent(in   ), optional:: xy_SurfMajCompIceB(0:imax-1, 1:jmax)
                              ! $ M_mcs (t-\Delta t) $ .
                              ! Surface major component ice amount (kg m-2)
    real(DP), intent(in   ), optional:: xy_SoilMoistB(0:imax-1, 1:jmax)
                              ! $ M_ws (t-\Delta t) $ . 土壌水分 (kg m-2)
                              ! Soil moisture (kg m-2)
    real(DP), intent(in   ), optional:: xy_SurfSnowB(0:imax-1, 1:jmax)
                              ! $ M_ss (t-\Delta t) $ . 積雪量 (kg m-2)
                              ! Surface snow amount (kg m-2)
    real(DP), intent(inout), optional:: xy_SurfTemp (0:imax-1, 1:jmax)
                              ! 地表面温度. 
                              ! Surface temperature
    real(DP), intent(inout), optional:: xy_SurfAlbedo (0:imax-1, 1:jmax)
                              ! 地表アルベド. 
                              ! Surface albedo
    real(DP), intent(inout), optional:: xy_SurfHumidCoef (0:imax-1, 1:jmax)
                              ! 地表湿潤度. 
                              ! Surface humidity coefficient
    real(DP), intent(inout), optional:: xy_SurfRoughLenMom (0:imax-1, 1:jmax)
                              ! 地表粗度長. 
                              ! Surface rough length for momentum
    real(DP), intent(inout), optional:: xy_SurfRoughLenHeat(0:imax-1, 1:jmax)
                              ! 地表粗度長. 
                              ! Surface rough length for heat
    real(DP), intent(inout), optional:: xy_SurfHeatCapacity (0:imax-1, 1:jmax)
                              ! 地表熱容量. 
                              ! Surface heat capacity
    real(DP), intent(inout), optional:: xy_DeepSubSurfHeatFlux (0:imax-1, 1:jmax)
                              ! 地中熱フラックス. 
                              ! "Deep subsurface heat flux"
                              ! Heat flux at the bottom of surface/soil layer.
    integer , intent(inout), optional:: xy_SurfCond (0:imax-1, 1:jmax)
                              ! 惑星表面状態 (0: 固定, 1: 可変). 
                              ! Surface condition (0: fixed, 1: variable)
    integer , intent(inout), optional:: xy_SurfType (0:imax-1, 1:jmax)
                              ! 惑星表面タイプ (土地利用)
                              ! Surface type (land use)
    real(DP), intent(inout), optional:: xy_SurfHeight   (0:imax-1, 1:jmax)
                              ! $ z_s $ . 地表面高度. 
                              ! Surface height. 
    real(DP), intent(inout), optional:: xy_SurfHeightStd(0:imax-1, 1:jmax)
                              ! $ z_s $ . 地表面高度. 
                              ! Surface height. 
    real(DP), intent(inout), optional:: xy_SeaIceConc(0:imax-1,1:jmax)
                              ! 海氷密度 (0 <= xy_SeaIceConc <= 1)
                              ! Sea ice concentration (0 <= xy_SeaIceConc <= 1)
    real(DP), intent(inout), optional:: xy_SoilHeatCap(0:imax-1,1:jmax)
                              ! 土壌熱容量 (J K-1 kg-1)
                              ! Specific heat of soil (J K-1 kg-1)
    real(DP), intent(inout), optional:: xy_SoilHeatDiffCoef(0:imax-1,1:jmax)
                              ! 土壌熱伝導率 (W m-1 K-1)
                              ! Heat conduction coefficient of soil (W m-1 K-1)

    ! 作業変数
    ! Work variables
    !
    real(DP), allocatable, save:: xy_SurfTempSave (:,:)
                              ! 地表面温度の保存値 (K)
                              ! Saved values of surface temperature (K)
    real(DP), allocatable, save:: xy_SeaIceConcSave(:,:)
                              ! 海氷面密度の保存値
                              ! Saved values of sea ice concentration
    real(DP), allocatable, save:: xy_SurfAlbedoSave(:,:)
                              ! アルベドの保存値
                              ! Saved values of albedo

    logical      :: xy_BucketFlagOceanGrid(0:imax-1,1:jmax)
                              !
                              ! Flag for ocean grid point used in bucket model
    real(DP), allocatable, save:: xy_SurfCulIntSave(:,:)
    real(DP)                   :: xy_SurfCulInt    (0:imax-1,1:jmax)
                              !
                              ! Surface cultivation intensity

    logical, save:: flag_first_SurfCond            = .true.
                              ! 初回を示すフラグ. 
                              ! Flag that indicates first loop
                              !
    logical, save:: flag_first_SurfType            = .true.
    logical, save:: flag_first_SurfCulInt          = .true.
    logical, save:: flag_first_SeaIceConc          = .true.
    logical, save:: flag_first_SurfTemp            = .true.
    logical, save:: flag_first_SurfHeight          = .true.
    logical, save:: flag_first_SurfHeightStd       = .true.
    logical, save:: flag_first_SurfAlbedo          = .true.
    logical, save:: flag_first_SurfHumidCoef       = .true.
    logical, save:: flag_first_SurfRoughLen        = .true.
    logical, save:: flag_first_SurfHeatCapacity    = .true.
    logical, save:: flag_first_DeepSubSurfHeatFlux = .true.
    logical, save:: flag_first_SoilHeatCap         = .true.
    logical, save:: flag_first_SoilHeatDiffCoef    = .true.

    logical :: FlagSetSurfType
    logical :: FlagSetSeaIceConc
    logical :: FlagSetSurfCond
    logical :: FlagSetSurfCulInt
    logical :: FlagSetSurfTemp
    logical :: FlagSetSurfHeight
    logical :: FlagSetSurfHeightStd
    logical :: FlagSetSurfAlbedo
    logical :: FlagSetSurfHumidCoef
    logical :: FlagSetSurfRoughLenMom
    logical :: FlagSetSurfRoughLenHeat
    logical :: FlagSetSurfHeatCapacity
    logical :: FlagSetDeepSubSurfHeatFlux
    logical :: FlagSetSoilHeatCap
    logical :: FlagSetSoilHeatDiffCoef

    logical:: flag_mpi_init

    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. surface_properties_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )


    flag_mpi_init = .true.

    FlagSetSurfType            = .false.
    FlagSetSeaIceConc          = .false.
    FlagSetSurfCond            = .false.
    FlagSetSurfCulInt          = .false.
    FlagSetSurfTemp            = .false.
    FlagSetSurfHeight          = .false.
    FlagSetSurfHeightStd       = .false.
    FlagSetSurfAlbedo          = .false.
    FlagSetSurfHumidCoef       = .false.
    FlagSetSurfRoughLenMom     = .false.
    FlagSetSurfRoughLenHeat    = .false.
    FlagSetSurfHeatCapacity    = .false.
    FlagSetDeepSubSurfHeatFlux = .false.
    FlagSetSoilHeatCap         = .false.
    FlagSetSoilHeatDiffCoef    = .false.


    ! NOTICE:
    ! The surface condition has to be set, before other fields are set.
    !
    ! 惑星表面タイプ (土地利用)
    ! Surface type (land use)
    !
    if ( present(xy_SurfType) ) then

      if ( SurfTypeSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfType ) then
          call HistoryGet( SurfTypeFile, SurfTypeName, xy_SurfType, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
        if ( SurfCondSetting /= 'generate_from_SurfType' ) then
          call MessageNotify( 'E', module_name, " SurfCond has to be 'generate_from_SurfType', if SurfTypeSetting = %c.", c1 = trim(SurfTypeSetting) )
        end if
      else if ( SurfTypeSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfType ) then
          call SetSurfData( xy_SurfType = xy_SurfType )
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfTypeSetting = %c is not appropriate.', c1 = trim(SurfTypeSetting) )
      end if

      FlagSetSurfType = .true.

      flag_first_SurfType = .false.

    end if


    ! NOTICE:
    ! The sea ice distribution has to be set, 
    ! before set SurfTemp (surface temperature) and SurfCond. 
    !
    ! 海氷面密度
    ! Sea ice concentration
    !
    if ( present(xy_SeaIceConc) ) then

      if ( flag_first_SeaIceConc ) then
        ! 保存用変数の割付
        ! Allocate a variable for save
        !
        allocate( xy_SeaIceConcSave(0:imax-1, 1:jmax) )
      end if
      if ( SeaIceSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !

        ! This will be deleted near future (yot, 2010/10/11)
!!$        if ( flag_first_SeaIceConc ) then
!!$          call HistoryGet( &
!!$            & SeaIceFile, SeaIceName,          & ! (in)
!!$            & xy_SeaIceConcSave,               & ! (out)
!!$            & flag_mpi_split = flag_mpi_init )   ! (in) optional
!!$        end if
        call SetValuesFromTimeSeriesWrapper( 'SIC', SeaIceFile, SeaIceName, xy_SeaIceConcSave )
      else if ( SeaIceSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SeaIceConc ) then
          call SetSurfData( xy_SeaIceConc = xy_SeaIceConcSave )
        end if
      else
        call MessageNotify( 'E', module_name, ' SeaIceSetting = %c is not appropriate.', c1 = trim(SeaIceSetting) )
      end if
      ! 海氷面密度の設定 ( xy_SurfCond == 0 の場所のみ )
      ! Setting of sea ice concentration ( where xy_SurfCond == 0 only )
      !
      xy_SeaIceConc = xy_SeaIceConcSave

      FlagSetSeaIceConc = .true.

      flag_first_SeaIceConc = .false.

    end if


    ! 惑星表面状態
    ! Surface condition
    ! Flag whether surface temperature is calculated or not
    ! 0 : surface temperature is not calculated
    ! 1 : surface temperature is     calculated
    !
    if ( present(xy_SurfCond) ) then

      ! NOTICE:
      ! Before set SurfCond, SeaIceConc has to be set.
      if ( .not. FlagSetSeaIceConc ) then
        call MessageNotify( 'E', module_name, " SeaIceConc has to be set before setting SurfCond is set." )
      end if

      if ( SurfCondSetting == 'generate_from_SurfType' ) then
        if ( flag_first_SurfCond ) then
!!$          if ( ( SurfTypeSetting /= 'file' ) .and. ( SurfTypeSetting /= 'generate_internally' ) ) then
!!$            call MessageNotify( 'E', module_name, &
!!$              & " SurfCond has to be 'generate_from_SurfType' or 'generate_internally', if SurfTypeSetting = %c.", &
!!$              & c1 = trim(SurfTypeSetting) )
!!$          end if
          call MessageNotify( 'M', module_name, ' xy_SurfCond is constructed by use of xy_SurfType values because SurfTypeSetting = %c.', c1 = trim(SurfTypeSetting) )
        end if
        do j = 1, jmax
          do i = 0, imax-1
            if ( xy_SurfType(i,j) == 0 ) then
              if ( SeaIceAboveThreshold( xy_SeaIceConc(i,j) ) ) then
                xy_SurfCond(i,j) = 1
              else if ( FlagSlabOcean ) then
                xy_SurfCond(i,j) = 1
              else
                xy_SurfCond(i,j) = 0
              end if
            else
              xy_SurfCond(i,j) = 1
            end if
          end do
        end do

      else if ( SurfCondSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfCond ) then
          call HistoryGet( SurfCondFile, SurfCondName, xy_SurfCond, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( SurfCondSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfCond ) then
          call SetSurfData( xy_SurfCond = xy_SurfCond )
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfCondSetting = %c is not appropriate.', c1 = trim(SurfCondSetting) )
      end if

      ! Check of SurfCond values
      !
      do j = 1, jmax
        do i = 0, imax-1
          if ( ( xy_SurfCond(i,j) < 0 ) .or. ( xy_SurfCond(i,j) > 1 ) ) then
            call MessageNotify( 'E', module_name, ' SurfCond value of %d is not appropriate.', i = (/ xy_SurfCond(i,j) /) )
          end if
        end do
      end do

      FlagSetSurfCond = .true.

      flag_first_SurfCond = .false.

    end if


    ! 
    ! Surface cultivation index
    !
    ! Cultivation intensity is set only when xy_SurfType is present.
    if ( present( xy_SurfType ) ) then

      ! NOTICE:
      ! Before set SurfCulInt, SurfType has to be set.
      if ( .not. FlagSetSurfType ) then
        call MessageNotify( 'E', module_name, " SurfType has to be set before setting SurfCulInt is set." )
      end if

      if ( flag_first_SurfCulInt ) then
        ! 保存用変数の割付
        ! Allocate a variable for save
        !
        allocate( xy_SurfCulIntSave(0:imax-1, 1:jmax) )
      end if
      if ( SurfCulIntSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( SurfTypeSetting /= 'file' ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'file', when SurfCulIntSetting = %c.", c1 = trim(SurfCulIntSetting) )
        end if
        call SetValuesFromTimeSeriesWrapper( 'CI', SurfCulIntFile, SurfCulIntName, xy_SurfCulIntSave )
      else if ( SurfCulIntSetting == 'generate_internally' ) then
        xy_SurfCulIntSave = 0.0_DP
      else
        call MessageNotify( 'E', module_name, ' SurfCulIntSetting = %c is not appropriate.', c1 = trim(SurfCulIntSetting) )
      end if
      !
      xy_SurfCulInt = xy_SurfCulIntSave

      FlagSetSurfCulInt = .true.
      flag_first_SurfCulInt = .false.
    else
      xy_SurfCulInt = 0.0_DP

      FlagSetSurfCulInt = .true.
    end if



    ! 地表面温度
    ! surface temperature
    !
    if ( present(xy_SurfTemp) ) then

      ! NOTICE:
      ! Before set surface temperature, sea ice distribution has to be set.
      if ( .not. FlagSetSeaIceConc ) then
        call MessageNotify( 'E', module_name, " SeaIceConc has to be set before setting SurfTemp is set." )
      end if

      if ( flag_first_SurfTemp ) then
        ! 保存用変数の割付
        ! Allocate a variable for save
        !
        allocate( xy_SurfTempSave  (0:imax-1, 1:jmax) )
      end if
      if ( SurfTempSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !

        ! This will be deleted near future (yot, 2010/10/11)
!!$        if ( flag_first_SurfTemp ) then
!!$          call HistoryGet( &
!!$            & SurfTempFile, SurfTempName, &    ! (in)
!!$            & xy_SurfTempSave, &               ! (out)
!!$            & flag_mpi_split = flag_mpi_init ) ! (in) optional
!!$        end if
        call SetValuesFromTimeSeriesWrapper( 'SST', SurfTempFile, SurfTempName, xy_SurfTempSave )
      else if ( SurfTempSetting == 'GABLS2' ) then
        !
        ! Routines for GABLS tests
        !
        call SetGabls2SurfTemp( xy_SurfTempSave )
      else if ( SurfTempSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfTemp ) then
          call SetSurfData( xy_SurfTemp = xy_SurfTempSave )
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfTempSetting = %c is not appropriate.', c1 = trim(SurfTempSetting) )
      end if
      ! 地表面温度を SST で置き換え ( xy_SurfCond <=0 の場所のみ )
      ! Surface temperature is replaced with SST ( only xy_SurfCond <=0 )
      !
      if ( present(xy_SurfTemp) ) then

        if ( .not. present( xy_SurfCond ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfCond has to be present to set xy_SurfTemp.' )
        end if
        if ( .not. present( xy_SeaIceConc ) ) then
          call MessageNotify( 'E', module_name, ' xy_SeaIceConc has to be present to set xy_SurfTemp.' )
        end if

        do j = 1, jmax
          do i = 0, imax-1
            if ( xy_SurfCond(i,j) == 0 ) then
              xy_SurfTemp(i,j) = xy_SurfTempSave(i,j)
            end if
          end do
        end do

      end if

      FlagSetSurfTemp = .true.

      flag_first_SurfTemp = .false.
    end if


    ! 地形
    ! Topography
    !
    if ( present(xy_SurfHeight) ) then

      if ( SurfHeightSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfHeight ) then
          call HistoryGet( SurfHeightFile, SurfHeightName, xy_SurfHeight, flag_mpi_split = flag_mpi_init )   ! (in) optional
        end if
      else if ( SurfHeightSetting == 'generate_internally' ) then
        if ( flag_first_SurfHeight ) then
          xy_SurfHeight = 0.0_DP
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfHeightSetting = %c is not appropriate.', c1 = trim(SurfHeightSetting) )
      end if

      FlagSetSurfHeight = .true.

      flag_first_SurfHeight = .false.
    end if

    ! 
    ! Surface height standard deviation
    !
    if ( present(xy_SurfHeightStd) ) then

      if ( SurfHeightStdSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfHeightStd ) then
          call HistoryGet( SurfHeightStdFile, SurfHeightStdName, xy_SurfHeightStd, flag_mpi_split = flag_mpi_init )        ! (in) optional
        end if
      else if ( SurfHeightStdSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        ! 
        if ( flag_first_SurfHeightStd ) then
          call SetSurfData( xy_SurfHeightStd = xy_SurfHeightStd )
        end if
      else
        call MessageNotify( 'E', module_name, ' SurfHeightStdSetting = %c is not appropriate.', c1 = trim(SurfHeightStdSetting) )
      end if

      FlagSetSurfHeightStd = .true.

      flag_first_SurfHeightStd = .false.
    end if


    ! アルベド
    ! Albedo
    !
    if ( present(xy_SurfAlbedo) ) then

      ! NOTICE:
      ! The surface condition and sea ice concentration have to be set, 
      ! before albedo is set.
      if ( ( .not. FlagSetSurfCond ) .or. ( .not. FlagSetSeaIceConc ) ) then
        call MessageNotify( 'E', module_name, " SurfCond and SeaIceConc have to be set before setting SurfAlbedo is set." )
      end if

      if ( flag_first_SurfAlbedo ) then
        ! 保存用変数の割付
        ! Allocate a variable for save
        !
        allocate( xy_SurfAlbedoSave(0:imax-1, 1:jmax) )
      end if
      if ( AlbedoSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfAlbedo ) then
          call HistoryGet( AlbedoFile, AlbedoName, xy_SurfAlbedoSave, flag_mpi_split = flag_mpi_init ) ! (in) optional
        end if
!!$        call SetValuesFromTimeSeriesWrapper(    &
!!$          & 'surface_albedo',                   &
!!$          & AlbedoFile, AlbedoName,             &
!!$          & xy_SurfAlbedoSave                   &               ! (inout)
!!$          & )
      else if ( AlbedoSetting == 'Matthews' ) then
        ! アルベドを Matthews のデータをもとに設定
        ! Surface albedo is set based on Matthews' data
        !
        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( SurfTypeSetting /= 'file' ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'file', when AlbedoSetting = %c.", c1 = trim(AlbedoSetting) )
        end if
        call SetAlbedoMatthews( xy_SurfType, xy_SurfAlbedoSave )
        ! Modify albedo due to cultivation
        call ModAlbedoMatthewsCultivation( xy_SurfType, xy_SurfCulInt, xy_SurfAlbedoSave )
      else if ( AlbedoSetting == 'LOContrast' ) then
        ! アルベドの設定, 陸面と海洋の差のみ考慮
        ! Set albedo, only considering land-ocean contrast
        !
        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( SurfTypeSetting /= 'file' ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'file', when AlbedoSetting = %c.", c1 = trim(AlbedoSetting) )
        end if
        call SetAlbedoLO( xy_SurfType, xy_SurfAlbedoSave )
      else if ( AlbedoSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        ! 
        if ( flag_first_SurfAlbedo ) then
          call SetSurfData( xy_SurfAlbedo = xy_SurfAlbedoSave )
        end if
      else
        call MessageNotify( 'E', module_name, ' AlbedoSetting = %c is not appropriate.', c1 = trim(AlbedoSetting) )
      end if
      ! アルベドの設定
      ! Setting of albedo
      !
      xy_SurfAlbedo = xy_SurfAlbedoSave


      if ( present( xy_SurfType ) ) then
        ! 雪と海氷によるアルベド変化
        ! modification of surface albedo on the snow covered ground and on the sea ice
        !

        if ( .not. present( xy_SurfMajCompIceB ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfMajCompIceB has to be present to set xy_SurfAlbedo.' )
        end if
        if ( .not. present( xy_SurfSnowB ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfSnowB has to be present to set xy_SurfAlbedo.' )
        end if
        if ( .not. present( xy_SeaIceConc ) ) then
          call MessageNotify( 'E', module_name, ' xy_SeaIceConc has to be present to set xy_SurfAlbedo.' )
        end if

        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
!!$        if ( SurfTypeSetting /= 'file' ) then
!!$          call MessageNotify( 'E', module_name, &
!!$            & " SurfType has to be 'file'." )
!!$        end if

        call ModAlbedoDueToSnowSeaIce( xy_SurfType, xy_SurfMajCompIceB, xy_SurfSnowB, xy_SeaIceConc, xy_SurfAlbedo )
      else
        call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to modify albedo due to snow and sea ice.' )
      end if

      FlagSetSurfAlbedo = .true.

      flag_first_SurfAlbedo = .false.
    end if


    ! 惑星表面湿潤度
    ! Surface humidity coefficient
    !
    if ( present(xy_SurfHumidCoef) ) then

      ! NOTICE:
      ! The surface condition has to be set, before humidity coefficient 
      ! is set.
      if ( .not. FlagSetSurfCond ) then
        call MessageNotify( 'E', module_name, " SurfCond has to be set before setting SurfHumidCoef is set." )
      end if

      if ( HumidCoefSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfHumidCoef ) then
          call HistoryGet( HumidcoefFile, HumidcoefName, xy_SurfHumidcoef, flag_mpi_split = flag_mpi_init ) ! (in) optional
        end if
      else if ( HumidCoefSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfHumidCoef ) then
          call SetSurfData( xy_SurfHumidCoef = xy_SurfHumidCoef )
        end if
      else
        call MessageNotify( 'E', module_name, ' HumidCoefSetting = %c is not appropriate.', c1 = trim(HumidCoefSetting) )
      end if

      if ( FlagUseBucket ) then
        if ( ( present( xy_SurfType   ) ) .and. ( present( xy_SoilMoistB ) ) .and. ( present( xy_SurfSnowB  ) ) ) then
          ! バケツモデルに関わる地表面湿潤度の設定
          ! Setting of surface humidity coefficient
          !
          call BucketSetFlagOceanFromMatthews( xy_SurfType, xy_BucketFlagOceanGrid )
          call BucketModHumidCoef( xy_BucketFlagOceanGrid, xy_SoilMoistB, xy_SurfSnowB, xy_SurfHumidCoef )
        else
          call MessageNotify( 'E', module_name, ' xy_SurfType, xy_SoilMoistB and xy_SurfSnowB have to be present to modify humidity coefficient with bucket model.' )
        end if
      end if

      FlagSetSurfHumidCoef = .true.

      flag_first_SurfHumidCoef = .false.
    end if


    ! 粗度長
    ! Roughness length
    !
    if ( present(xy_SurfRoughLenMom) ) then
      if ( .not. present(xy_SurfRoughLenHeat) ) then
        call MessageNotify( 'E', module_name, ' xy_SurfRoughLenHeat has to be present if xy_SurfRoughLenMom is present.' )
      end if
    else
      if ( present(xy_SurfRoughLenHeat) ) then
        call MessageNotify( 'E', module_name, ' xy_SurfRoughLenMom has to be present if xy_SurfRoughLenHeat is present.' )
      end if
    end if
    if ( present(xy_SurfRoughLenMom) .and. present(xy_SurfRoughLenHeat) ) then

      if ( RoughLengthSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfRoughLen ) then
          call HistoryGet( RoughLengthFile, RoughLengthName, xy_SurfRoughLenMom, flag_mpi_split = flag_mpi_init )    ! (in) optional
          ! set roughness length for heat
          xy_SurfRoughLenHeat = xy_SurfRoughLenMom * RoughLenHeatFactor
        end if
      else if ( RoughLengthSetting == 'LOContrast' ) then
        ! 粗度長の設定, 陸面と海洋の差のみ考慮
        ! Set roughness length, only considering land-ocean contrast
        !
        if ( .not. present( xy_SurfType ) ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be present to set xy_SurfAlbedo.' )
        end if
        if ( SurfTypeSetting /= 'file' ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'file', when RoughLengthSetting = %c.", c1 = trim(RoughLengthSetting) )
        end if
        call SetRoughLenLO( xy_SurfType, xy_SurfRoughLenMom )
        ! set roughness length for heat
        xy_SurfRoughLenHeat = xy_SurfRoughLenMom * RoughLenHeatFactor
      else if ( RoughLengthSetting == 'Matthews' ) then
        ! 粗度長の設定, Matthews のデータに基づく
        ! Set roughness length based on Matthews dataset
        !
        if ( .not. FlagSetSurfType ) then
          call MessageNotify( 'E', module_name, ' xy_SurfType has to be set to set xy_SurfRoughLenMom.' )
        end if
        if ( SurfTypeSetting /= 'file' ) then
          call MessageNotify( 'E', module_name, " SurfType has to be 'file', when RoughLengthSetting = %c.", c1 = trim(RoughLengthSetting) )
        end if
        call SetRoughLenLandMatthews( "Mom", xy_SurfType, xy_SurfRoughLenMom )
        ! Modify albedo due to cultivation
        call ModRoughLenMatthewsCultivation( "Mom", xy_SurfType, xy_SurfCulInt, xy_SurfRoughLenMom )

        ! set roughness length for heat
        call SetRoughLenLandMatthews( "Heat", xy_SurfType, xy_SurfRoughLenHeat )
        ! Modify albedo due to cultivation
        call ModRoughLenMatthewsCultivation( "Heat", xy_SurfType, xy_SurfCulInt, xy_SurfRoughLenHeat )

      else if ( RoughLengthSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfRoughLen ) then
          call SetSurfData( xy_SurfRoughLength = xy_SurfRoughLenMom )
          ! set roughness length for heat
          xy_SurfRoughLenHeat = xy_SurfRoughLenMom * RoughLenHeatFactor
        end if
      else
        call MessageNotify( 'E', module_name, ' RoughLengthSetting = %c is not appropriate.', c1 = trim(RoughLengthSetting) )
      end if

      FlagSetSurfRoughLenMom  = .true.
      FlagSetSurfRoughLenHeat = .true.

      flag_first_SurfRoughLen = .false.
    end if


    ! 地表熱容量
    ! Surface heat capacity
    !
    if ( present(xy_SurfHeatCapacity) ) then

      if ( HeatCapacitySetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SurfHeatCapacity ) then
          call HistoryGet( HeatCapacityFile, HeatCapacityName, xy_SurfHeatCapacity, flag_mpi_split = flag_mpi_init )      ! (in) optional
        end if
      else if ( HeatCapacitySetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SurfHeatCapacity ) then
          call SetSurfData( xy_SurfHeatCapacity = xy_SurfHeatCapacity )
        end if
      else
        call MessageNotify( 'E', module_name, ' HeatCapacitySetting = %c is not appropriate.', c1 = trim(HeatCapacitySetting) )
      end if

      FlagSetSurfHeatCapacity = .true.

      flag_first_SurfHeatCapacity = .false.
    end if


    ! 地中熱フラックス
    ! Ground temperature flux
    !
    if ( present(xy_DeepSubSurfHeatFlux) ) then

      if ( TempFluxSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_DeepSubSurfHeatFlux ) then
          call HistoryGet( TempFluxFile, TempFluxName, xy_DeepSubSurfHeatFlux, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( TempFluxSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_DeepSubSurfHeatFlux ) then
          call SetSurfData( xy_DeepSubSurfHeatFlux = xy_DeepSubSurfHeatFlux )
        end if
      else
        call MessageNotify( 'E', module_name, ' TempFluxSetting = %c is not appropriate.', c1 = trim(TempFluxSetting) )
      end if

      FlagSetDeepSubSurfHeatFlux = .true.

      flag_first_DeepSubSurfHeatFlux = .false.
    end if


    ! 土壌熱容量 (J K-1 kg-1)
    ! Specific heat of soil (J K-1 kg-1)
    !
    if ( present(xy_SoilHeatCap) ) then

      if ( SoilHeatCapSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SoilHeatCap ) then
          call HistoryGet( SoilHeatCapFile, SoilHeatCapName, xy_SoilHeatCap, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( SoilHeatCapSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SoilHeatCap ) then
          call SetSurfData( xy_SoilHeatCap = xy_SoilHeatCap )
        end if
      else
        call MessageNotify( 'E', module_name, ' SoilHeatCapSetting = %c is not appropriate.', c1 = trim(SoilHeatCapSetting) )
      end if

      FlagSetSoilHeatCap = .true.

      flag_first_SoilHeatCap = .false.
    end if


    ! 土壌熱伝導率 (W m-1 K-1)
    ! Heat conduction coefficient of soil (W m-1 K-1)
    !
    if ( present(xy_SoilHeatDiffCoef) ) then

      if ( SoilHeatDiffCoefSetting == 'file' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SoilHeatDiffCoef ) then
          call HistoryGet( SoilHeatDiffCoefFile, SoilHeatDiffCoefName, xy_SoilHeatDiffCoef, flag_mpi_split = flag_mpi_init )  ! (in) optional
        end if
      else if ( SoilHeatDiffCoefSetting == 'file_thermal_inertia' ) then
        ! データをファイルから取得
        ! Data is input from files
        !
        if ( flag_first_SoilHeatDiffCoef ) then
          call HistoryGet( SoilHeatDiffCoefFile, SoilHeatDiffCoefName, xy_SoilHeatDiffCoef, flag_mpi_split = flag_mpi_init )  ! (in) optional

          if ( present( xy_SoilHeatCap ) ) then
            xy_SoilHeatDiffCoef = xy_SoilHeatDiffCoef**2 / xy_SoilHeatCap
          else
            call MessageNotify( 'E', module_name, ' xy_SoilHeatCap has to be present to calculate heat diffusion coefficient of soil from thermal inertia.' )
          end if
        end if
      else if ( SoilHeatDiffCoefSetting == 'generate_internally' ) then
        ! データ (デフォルト値) を surface_data モジュールから取得
        ! Data (default values) is input from "surface_data" module
        !
        if ( flag_first_SoilHeatDiffCoef ) then
          call SetSurfData( xy_SoilHeatDiffCoef = xy_SoilHeatDiffCoef )
        end if
      else if ( SoilHeatDiffCoefSetting == 'simple' ) then
        if ( .not. FlagUseBucket ) then
          call MessageNotify( 'E', module_name, ' FlagUseBucket has to be .true. to set soil thermal diffusion coefficient.' )
        end if
        if ( ( FlagSetSurfType          ) .and. ( present( xy_SoilMoistB ) ) ) then
          ! 土壌熱伝導係数の設定
          ! set soil thermal diffusion coefficient
          !
          call SetSoilThermDiffCoefSimple( xy_SurfType, xy_SoilMoistB, xy_SoilHeatDiffCoef )
        else
          call MessageNotify( 'E', module_name, ' xy_SurfType and xy_SoilMoistB have to be present to set soil thermal diffusion coefficient.' )
        end if
      else
        call MessageNotify( 'E', module_name, ' SoilHeatDiffCoefSetting = %c is not appropriate.', c1 = trim(TempFluxSetting) )
      end if

      FlagSetSoilHeatDiffCoef = .true.

      flag_first_SoilHeatDiffCoef = .false.
    end if


    ! ヒストリデータ出力
    ! History data output
    !
    call HistoryAutoPut( TimeN, 'SurfCulInt', xy_SurfCulInt )


    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )


  end subroutine SetSurfaceProperties
Subroutine :
ArgFlagSlabOcean :logical, intent(in )
: スラブオーシャン オン/オフ. flag for use of slab ocean on/off
ArgFlagUseBucket :logical, intent(in )
: flag for bucket model
ArgFlagSnow :logical, intent(in )
: flag for snow

surface_properties モジュールの初期化を行います. NAMELIST#surface_properties_nml の読み込みはこの手続きで行われます.

"surface_properties" module is initialized. "NAMELIST#surface_properties_nml" is loaded in this procedure.

This procedure input/output NAMELIST#surface_properties_nml .

[Source]

  subroutine SurfacePropertiesInit( ArgFlagSlabOcean, ArgFlagUseBucket, ArgFlagSnow )
    !
    ! surface_properties モジュールの初期化を行います. 
    ! NAMELIST#surface_properties_nml の読み込みはこの手続きで行われます. 
    !
    ! "surface_properties" module is initialized. 
    ! "NAMELIST#surface_properties_nml" is loaded in this procedure. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 種別型パラメタ
    ! Kind type parameter
    !
    use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoAddVariable

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime  ! $ \Delta t $ [s]

    !
    ! Routines for GABLS tests
    !
    use gabls, only : GablsInit

    ! Matthews のデータに基づく惑星表面アルベド設定
    ! set surface albedo based on data by Matthews
    !
    use albedo_Matthews, only : AlbedoMatthewsInit

    ! バケツモデル
    ! Bucket model
    !
    use Bucket_Model, only : BucketModelInit

    ! 雪と海氷によるアルベド変化
    ! modification of surface albedo on the snow covered ground and on the sea ice
    !
    use modify_albedo_snowseaice, only : ModAlbedoSnowSeaIceInit

    ! アルベド, 粗度長の設定, 陸面と海洋の差のみ考慮
    ! Set albedo and roughness length, only considering land-ocean contrast
    !
    use surface_properties_lo, only : SurfacePropertiesLOInit

    ! Matthews のデータに基づく地面粗度の設定
    ! set roughness length on land surface based on data by Matthews
    !
    use roughlen_Matthews, only : RoughLenMatthewsInit

    ! 土壌熱伝導係数の設定
    ! set soil thermal diffusion coefficient
    !
    use soil_thermdiffcoef, only : SoilThermDiffCoefInit


    ! 宣言文 ; Declaration statements
    !
    logical, intent(in ) :: ArgFlagSlabOcean
                              ! スラブオーシャン オン/オフ.
                              ! flag for use of slab ocean on/off
    logical, intent(in ) :: ArgFlagUseBucket
                              ! 
                              ! flag for bucket model
    logical, intent(in ) :: ArgFlagSnow
                              ! 
                              ! flag for snow

    ! 作業変数
    ! Work variables
    !
    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /surface_properties_nml/ SurfTempSetting, SurfTempFile, SurfTempName, SeaIceSetting, SeaIceFile, SeaIceName, AlbedoSetting, AlbedoFile, AlbedoName, HumidCoefSetting, HumidCoefFile, HumidCoefName, RoughLengthSetting, RoughLengthFile, RoughLengthName, HeatCapacitySetting, HeatCapacityFile, HeatCapacityName, TempFluxSetting, TempFluxFile, TempFluxName, SurfCondSetting, SurfCondFile, SurfCondName, SurfTypeSetting, SurfTypeFile, SurfTypeName, SurfCulIntSetting, SurfCulIntFile, SurfCulIntName, SurfHeightSetting, SurfHeightFile, SurfHeightName, SurfHeightStdSetting, SurfHeightStdFile, SurfHeightStdName, SoilHeatCapSetting, SoilHeatCapFile, SoilHeatCapName, SoilHeatDiffCoefSetting, SoilHeatDiffCoefFile, SoilHeatDiffCoefName, RoughLenHeatFactor

          ! デフォルト値については初期化手続 "surface_properties#SurfacePropertiesInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "surface_properties#SurfacePropertiesInit" for the default values. 
          !

!!$      & OutputFile, &
!!$      & IntValue, IntUnit


    ! 実行文 ; Executable statement
    !

    if ( surface_properties_inited ) return


    ! Set flag for slab ocean
    FlagUseBucket = ArgFlagUseBucket

    FlagSlabOcean = ArgFlagSlabOcean


    ! デフォルト値の設定
    ! Default values settings
    !
    SurfTempSetting         = 'generate_internally'
    SurfTempFile            = ''
    SurfTempName            = ''
    SeaIceSetting           = 'generate_internally'
    SeaIceFile              = ''
    SeaIceName              = ''
    AlbedoSetting           = 'generate_internally'
    AlbedoFile              = ''
    AlbedoName              = ''
    HumidCoefSetting        = 'generate_internally'
    HumidCoefFile           = ''
    HumidCoefName           = ''
    RoughLengthSetting      = 'generate_internally'
    RoughLengthFile         = ''
    RoughLengthName         = ''
    HeatCapacitySetting     = 'generate_internally'
    HeatCapacityFile        = ''
    HeatCapacityName        = ''
    TempFluxSetting         = 'generate_internally'
    TempFluxFile            = ''
    TempFluxName            = ''
    SurfCondSetting         = 'generate_internally'
    SurfCondFile            = ''
    SurfCondName            = ''
    SurfTypeSetting         = 'generate_internally'
    SurfTypeFile            = ''
    SurfTypeName            = ''
    SurfCulIntSetting       = 'generate_internally'
    SurfCulIntFile          = ''
    SurfCulIntName          = ''
    SurfHeightSetting       = 'generate_internally'
    SurfHeightFile          = ''
    SurfHeightName          = ''
    SurfHeightStdSetting    = 'generate_internally'
    SurfHeightStdFile       = ''
    SurfHeightStdName       = ''
    SoilHeatCapSetting      = 'generate_internally'
    SoilHeatCapFile         = ''
    SoilHeatCapName         = ''
    SoilHeatDiffCoefSetting = 'generate_internally'
    SoilHeatDiffCoefFile    = ''
    SoilHeatDiffCoefName    = ''

    RoughLenHeatFactor = 1.0_DP

!!$    OutputFile = 'sst.nc'
!!$    IntValue   = 1.0_DP
!!$    IntUnit    = 'day'

    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = surface_properties_nml, iostat = iostat_nml )
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
      if ( iostat_nml == 0 ) write( STDOUT, nml = surface_properties_nml )
    end if

!!$    ! 出力時間間隔の設定
!!$    ! Configure time interval of output 
!!$    !
!!$    call DCDiffTimeCreate( PrevOutputTime, & ! (out)
!!$      & sec = 0.0_DP )                       ! (in)
!!$    call DCDiffTimeCreate( IntTime, & ! (out)
!!$      & IntValue, IntUnit )           ! (in)


    ! A Value of "SurfTempSetting" is checked.
    !
    if ( ( SurfTempSetting == 'file' ) .and. ( FlagSlabOcean ) ) then
      call MessageNotify( 'E', module_name, "If FlagSlabOcean is .true., SurfTempSetting must not be 'file'." )
    end if


    ! Initialization of modules used in this module
    !

    ! Matthews のデータに基づく惑星表面アルベド設定
    ! set surface albedo based on data by Matthews
    !
    call AlbedoMatthewsInit

    if ( FlagUseBucket ) then
      ! バケツモデル
      ! Bucket model
      !
      call BucketModelInit( ArgFlagSnow )
    end if

    !
    ! Routines for GABLS tests
    !
    call GablsInit

    ! 雪と海氷によるアルベド変化
    ! modification of surface albedo on the snow covered ground and on the sea ice
    !
    call ModAlbedoSnowSeaIceInit

    ! アルベド, 粗度長の設定, 陸面と海洋の差のみ考慮
    ! Set albedo and roughness length, only considering land-ocean contrast
    !
    call SurfacePropertiesLOInit

    ! Matthews のデータに基づく地面粗度の設定
    ! set roughness length on land surface based on data by Matthews
    !
    call RoughLenMatthewsInit

    ! 土壌熱伝導係数の設定
    ! set soil thermal diffusion coefficient
    !
    call SoilThermDiffCoefInit( ArgFlagSnow )


    ! ヒストリデータ出力のためのへの変数登録
    ! Register of variables for history data output
    !
    call HistoryAutoAddVariable( 'SurfCulInt' , (/ 'lon ', 'lat ', 'time' /), 'cultivation intensity', '1' )             ! (in)


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, 'Input:: ' )
    call MessageNotify( 'M', module_name, '  SurfTempSetting         = %c', c1 = trim(SurfTempSetting) )
    call MessageNotify( 'M', module_name, '  SurfTempFile            = %c', c1 = trim(SurfTempFile) )
    call MessageNotify( 'M', module_name, '  SurfTempName            = %c', c1 = trim(SurfTempName        ) )
    call MessageNotify( 'M', module_name, '  SeaIceSetting           = %c', c1 = trim(SeaIceSetting) )
    call MessageNotify( 'M', module_name, '  SeaIceFile              = %c', c1 = trim(SeaIceFile) )
    call MessageNotify( 'M', module_name, '  SeaIceName              = %c', c1 = trim(SeaIceName        ) )
    call MessageNotify( 'M', module_name, '  AlbedoSetting           = %c', c1 = trim(AlbedoSetting      ) )
    call MessageNotify( 'M', module_name, '  AlbedoFile              = %c', c1 = trim(AlbedoFile      ) )
    call MessageNotify( 'M', module_name, '  AlbedoName              = %c', c1 = trim(AlbedoName      ) )
    call MessageNotify( 'M', module_name, '  HumidCoefSetting        = %c', c1 = trim(HumidCoefSetting ) )
    call MessageNotify( 'M', module_name, '  HumidCoefFile           = %c', c1 = trim(HumidCoefFile  ) )
    call MessageNotify( 'M', module_name, '  HumidCoefName           = %c', c1 = trim(HumidCoefName  ) )
    call MessageNotify( 'M', module_name, '  RoughLengthSetting      = %c', c1 = trim(RoughLengthSetting ) )
    call MessageNotify( 'M', module_name, '  RoughLengthFile         = %c', c1 = trim(RoughLengthFile ) )
    call MessageNotify( 'M', module_name, '  RoughLengthName         = %c', c1 = trim(RoughLengthName ) )
    call MessageNotify( 'M', module_name, '  HeatCapacitySetting     = %c', c1 = trim(HeatCapacitySetting) )
    call MessageNotify( 'M', module_name, '  HeatCapacityFile        = %c', c1 = trim(HeatCapacityFile) )
    call MessageNotify( 'M', module_name, '  HeatCapacityName        = %c', c1 = trim(HeatCapacityName) )
    call MessageNotify( 'M', module_name, '  TempFluxSetting         = %c', c1 = trim(TempFluxSetting  ) )
    call MessageNotify( 'M', module_name, '  TempFluxFile            = %c', c1 = trim(TempFluxFile  ) )
    call MessageNotify( 'M', module_name, '  TempFluxName            = %c', c1 = trim(TempFluxName  ) )
    call MessageNotify( 'M', module_name, '  SurfCondSetting         = %c', c1 = trim(SurfCondSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfCondFile            = %c', c1 = trim(SurfCondFile   ) )
    call MessageNotify( 'M', module_name, '  SurfCondName            = %c', c1 = trim(SurfCondName   ) )
    call MessageNotify( 'M', module_name, '  SurfTypeSetting         = %c', c1 = trim(SurfTypeSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfTypeFile            = %c', c1 = trim(SurfTypeFile   ) )
    call MessageNotify( 'M', module_name, '  SurfTypeName            = %c', c1 = trim(SurfTypeName   ) )
    call MessageNotify( 'M', module_name, '  SurfCulIntSetting       = %c', c1 = trim(SurfCulIntSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfCulIntFile          = %c', c1 = trim(SurfCulIntFile   ) )
    call MessageNotify( 'M', module_name, '  SurfCulIntName          = %c', c1 = trim(SurfCulIntName   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightSetting       = %c', c1 = trim(SurfHeightSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightFile          = %c', c1 = trim(SurfHeightFile   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightName          = %c', c1 = trim(SurfHeightName   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightStdSetting    = %c', c1 = trim(SurfHeightStdSetting   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightStdFile       = %c', c1 = trim(SurfHeightStdFile   ) )
    call MessageNotify( 'M', module_name, '  SurfHeightStdName       = %c', c1 = trim(SurfHeightStdName   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatCapSetting      = %c', c1 = trim(SoilHeatCapSetting   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatCapFile         = %c', c1 = trim(SoilHeatCapFile   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatCapName         = %c', c1 = trim(SoilHeatCapName   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatDiffCoefSetting = %c', c1 = trim(SoilHeatDiffCoefSetting   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatDiffCoefFile    = %c', c1 = trim(SoilHeatDiffCoefFile   ) )
    call MessageNotify( 'M', module_name, '  SoilHeatDiffCoefName    = %c', c1 = trim(SoilHeatDiffCoefName   ) )

    call MessageNotify( 'M', module_name, '  RoughLenHeatFactor      = %f', d = (/RoughLenHeatFactor/) )


!!$    call MessageNotify( 'M', module_name, 'Output:: ' )
!!$    call MessageNotify( 'M', module_name, '  OutputFile = %c', c1 = trim(OutputFile) )
!!$    call MessageNotify( 'M', module_name, '  IntTime    = %f [%c]', d = (/ IntValue /), c1 = trim(IntUnit) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    surface_properties_inited = .true.

  end subroutine SurfacePropertiesInit

Private Instance methods

AlbedoFile
Variable :
AlbedoFile :character(STRING), save
: 地表アルベドのファイル名. File name of surface albedo
AlbedoName
Variable :
AlbedoName :character(TOKEN) , save
: 地表アルベドの変数名. Variable name of surface albedo
AlbedoSetting
Variable :
AlbedoSetting :character(STRING), save
: 地表アルベドの設定方法 Settingof surface albedo
FlagSlabOcean
Variable :
FlagSlabOcean :logical , save
: スラブオーシャン オン/オフ. flag for use of slab ocean on/off
FlagUseBucket
Variable :
FlagUseBucket :logical, save
HeatCapacityFile
Variable :
HeatCapacityFile :character(STRING), save
: 地表熱容量のファイル名. File name of surface heat capacity
HeatCapacityName
Variable :
HeatCapacityName :character(TOKEN) , save
: 地表熱容量の変数名. Variable name of surface heat capacity
HeatCapacitySetting
Variable :
HeatCapacitySetting :character(STRING), save
: 地表熱容量の設定方法 Setting of surface heat capacity
HumidCoefFile
Variable :
HumidCoefFile :character(STRING), save
: 地表湿潤度のファイル名. File name of surface humidity coefficient
HumidCoefName
Variable :
HumidCoefName :character(TOKEN) , save
: 地表湿潤度の変数名. Variable name of surface humidity coefficient
HumidCoefSetting
Variable :
HumidCoefSetting :character(STRING), save
: 地表湿潤度の設定方法 Setting of surface humidity coefficient
RoughLenHeatFactor
Variable :
RoughLenHeatFactor :real(DP), save
: 運動量と熱の地表粗度長の比. Ratio of roughness length for momentum and heat
RoughLengthFile
Variable :
RoughLengthFile :character(STRING), save
: 地表粗度長のファイル名. File name of surface rough length
RoughLengthName
Variable :
RoughLengthName :character(TOKEN) , save
: 地表粗度長の変数名. Variable name of surface rough length
RoughLengthSetting
Variable :
RoughLengthSetting :character(STRING), save
: 地表粗度長の設定方法 Setting of surface rough length
SeaIceFile
Variable :
SeaIceFile :character(STRING), save
: 海氷面密度のファイル名. File name of sea ice concentration
SeaIceName
Variable :
SeaIceName :character(TOKEN) , save
: 海氷面密度の変数名. Variable name of sea ice concentration
SeaIceSetting
Variable :
SeaIceSetting :character(STRING), save
: 海氷面密度の設定方法 Setting of sea ice concentration
SoilHeatCapFile
Variable :
SoilHeatCapFile :character(STRING), save
: 土壌熱容量のファイル名. File name of heat conduction coefficient of soil
SoilHeatCapName
Variable :
SoilHeatCapName :character(TOKEN) , save
: 土壌熱容量の変数名. Variable name of heat conduction coefficient of soil
SoilHeatCapSetting
Variable :
SoilHeatCapSetting :character(STRING), save
: 土壌熱容量の設定方法 Setting of heat conduction coefficient of soil
SoilHeatDiffCoefFile
Variable :
SoilHeatDiffCoefFile :character(STRING), save
: 土壌熱伝導率のファイル名. File name of heat conduction coefficient of soil
SoilHeatDiffCoefName
Variable :
SoilHeatDiffCoefName :character(TOKEN) , save
: 土壌熱伝導率の変数名. Variable name of heat conduction coefficient of soil
SoilHeatDiffCoefSetting
Variable :
SoilHeatDiffCoefSetting :character(STRING), save
: 土壌熱伝導率の設定方法 Setting of heat conduction coefficient of soil
SurfCondFile
Variable :
SurfCondFile :character(STRING), save
: 惑星表面状態のファイル名. File name of surface condition
SurfCondName
Variable :
SurfCondName :character(TOKEN) , save
: 惑星表面状態の変数名. Variable name of surface condition
SurfCondSetting
Variable :
SurfCondSetting :character(STRING), save
: 惑星表面状態の設定方法 Setting of surface condition
SurfCulIntFile
Variable :
SurfCulIntFile :character(STRING), save
: … のファイル名. File name of surface cultivation intensity
SurfCulIntName
Variable :
SurfCulIntName :character(TOKEN) , save
: … の変数名. Variable name of surface cultivation intensity
SurfCulIntSetting
Variable :
SurfCulIntSetting :character(STRING), save
: … の設定方法 Setting of surface cultivation intensity
SurfHeightFile
Variable :
SurfHeightFile :character(STRING), save
: 地表面高度のファイル名. File name of surface height
SurfHeightName
Variable :
SurfHeightName :character(TOKEN) , save
: 地表面高度の変数名. Variable name of surface height
SurfHeightSetting
Variable :
SurfHeightSetting :character(STRING), save
: 地表面高度の設定方法 Setting of surface height
SurfHeightStdFile
Variable :
SurfHeightStdFile :character(STRING), save
: File name of surface height standard deviation
SurfHeightStdName
Variable :
SurfHeightStdName :character(TOKEN) , save
: Variable name of surface height standard deviation
SurfHeightStdSetting
Variable :
SurfHeightStdSetting :character(STRING), save
: Setting of surface height standard deviation
SurfTempFile
Variable :
SurfTempFile :character(STRING), save
: 地表面温度のファイル名. File name of surface temperature
SurfTempName
Variable :
SurfTempName :character(TOKEN) , save
: 地表面温度の変数名. Variable name of surface temperature
SurfTempSetting
Variable :
SurfTempSetting :character(STRING), save
: 地表面温度の設定方法 Setting of surface temperature
SurfTypeFile
Variable :
SurfTypeFile :character(STRING), save
: 惑星表面タイプ (土地利用) のファイル名. File name of surface type (land use)
SurfTypeName
Variable :
SurfTypeName :character(TOKEN) , save
: 惑星表面タイプ (土地利用) の変数名. Variable name of surface type (land use)
SurfTypeSetting
Variable :
SurfTypeSetting :character(STRING), save
: 惑星表面タイプ (土地利用) の設定方法 Setting of surface type (land use)
TempFluxFile
Variable :
TempFluxFile :character(STRING), save
: 地中熱フラックスのファイル名. File name of ground temperature flux
TempFluxName
Variable :
TempFluxName :character(TOKEN) , save
: 地中熱フラックスの変数名. Variable name of ground temperature flux
TempFluxSetting
Variable :
TempFluxSetting :character(STRING), save
: 地中熱フラックスの設定方法 Setting of ground temperature flux
module_name
Constant :
module_name = ‘surface_properties :character(*), parameter
: モジュールの名称. Module name
surface_properties_inited
Variable :
surface_properties_inited = .false. :logical, save
: 初期設定フラグ. Initialization flag
version
Constant :
version = ’$Name: dcpam5-20150131 $’ // ’$Id: surface_properties.f90,v 1.20 2015/01/31 06:16:26 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version