Class radiation_dcpam_E_V2
In: radiation/radiation_dcpam_E_V2.f90

dcpam 地球大気向け放射モデル Ver. 2

dcpam radiation model for the Earth‘s atmosphere Ver. 1

Note that Japanese and English are described in parallel.

地球大気向け放射モデル.

This is a radiation model for the Earth‘s atmospehre.

Radiation in the wavenumber range from 0 to 3000 cm-1 is calculated in the routine of long wave radiation. Radiation in the wavenumber range from 1000 to 57143 cm-1 (0.175 to 10 micron) is calculated in the routine of shortwave radiation.

References

Procedures List

RadiationDcpamEV2Flux :放射フラックスの計算
———— :————
RadiationDcpamEV2Flux :Calculate radiation flux

NAMELIST

NAMELIST#radiation_dcpam_E_V2_nml

Methods

Included Modules

dc_types gridset dc_message set_o3 radiation_dcpam_E_SW_V2_1 radiation_dcpam_E_LW_V2_3 dc_iounit namelist_util

Public Instance methods

Subroutine :
xy_SurfAlbedo(0:imax-1, 1:jmax) :real(DP), intent(in )
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
xyr_Press(0:imax-1, 1:jmax, 0:kmax) :real(DP), intent(in )
xyz_Temp(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
xyz_QH2OVap(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
: $ q $ . 混合比. Mass mixing ratio of constituents (1)
xyz_QH2OLiq(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
xyz_Height(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
xy_SurfTemp(0:imax-1, 1:jmax) :real(DP), intent(in )
xyr_RadSFlux(0:imax-1, 1:jmax, 0:kmax) :real(DP), intent(out)
xyr_RadLFlux(0:imax-1, 1:jmax, 0:kmax) :real(DP), intent(out)
xyra_DelRadLFlux(0:imax-1, 1:jmax, 0:kmax, 0:1) :real(DP), intent(out)

[Source]

  subroutine RadiationDcpamEV2Flux( xy_SurfAlbedo, xyz_Press, xyr_Press, xyz_Temp, xyz_QH2OVap, xyz_QH2OLiq, xyz_Height, xy_SurfTemp, xyr_RadSFlux, xyr_RadLFlux, xyra_DelRadLFlux )


    ! USE statements
    !

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify

    ! O3 分布の設定
    ! Set O3 distribution
    !
    use set_o3, only: SetO3

!!$    ! dcpam 地球大気向け短波放射モデル Ver. 2
!!$    ! dcpam short wave radiation model for the Earth's atmosphere Ver. 2
!!$    !
!!$    use radiation_dcpam_E_SW_V2, only: RadiationDcpamESWV2Flux

    ! dcpam 地球大気向け短波放射モデル Ver. 2.1
    ! dcpam short wave radiation model for the Earth's atmosphere Ver. 2.1
    !
    use radiation_dcpam_E_SW_V2_1, only: RadiationDcpamESWV21Flux

!!$    ! dcpam 地球大気向け長波放射モデル Ver. 2
!!$    ! dcpam long wave radiation model for the Earth's atmosphere Ver. 2
!!$    !
!!$    use radiation_dcpam_E_LW_V2, only : RadiationDcpamELWV2Flux
!!$
!!$    ! dcpam 地球大気向け長波放射モデル Ver. 2.1
!!$    ! dcpam long wave radiation model for the Earth's atmosphere Ver. 2.1
!!$    !
!!$    use radiation_dcpam_E_LW_V2_1, only : RadiationDcpamELWV21Flux
!!$
!!$    ! dcpam 地球大気向け長波放射モデル Ver. 2.2
!!$    ! dcpam long wave radiation model for the Earth's atmosphere Ver. 2.2
!!$    !
!!$    use radiation_dcpam_E_LW_V2_2, only : RadiationDcpamELWV22Flux

    ! dcpam 地球大気向け長波放射モデル Ver. 2.3
    ! dcpam long wave radiation model for the Earth's atmosphere Ver. 2.3
    !
    use radiation_dcpam_E_LW_V2_3, only : RadiationDcpamELWV23Flux

    real(DP), intent(in ) :: xy_SurfAlbedo   (0:imax-1, 1:jmax)
    real(DP), intent(in ) :: xyz_Press       (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyr_Press       (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(in ) :: xyz_Temp        (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyz_QH2OVap     (0:imax-1, 1:jmax, 1:kmax)
                              ! $ q $ .   混合比. Mass mixing ratio of constituents (1)
    real(DP), intent(in ) :: xyz_QH2OLiq     (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyz_Height      (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xy_SurfTemp     (0:imax-1, 1:jmax)
    real(DP), intent(out) :: xyr_RadSFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyr_RadLFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyra_DelRadLFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)


    ! Work variables
    !
    real(DP) :: xyz_QH2OSol(0:imax-1, 1:jmax, 1:kmax)


    ! Amount of water ice is assumed to be zero, for the moment.
    ! In future, this value will be an argument of this subroutine.
    !
    xyz_QH2OSol = 0.0_DP


    ! 初期化
    ! Initialization
    !
    if ( .not. radiation_dcpam_E_V2_inited ) call RadiationDcpamEV2Init


    ! O3 分布の設定
    ! Setting of O3 distribution
    !
    call SetO3( xyz_Press, xyz_QO3 )


!!$    select case ( SWVer )
!!$    case ( 0 )
!!$      ! dcpam 地球大気向け短波放射モデル Ver. 2
!!$      ! dcpam short wave radiation model for the Earth's atmosphere Ver. 2
!!$      !
!!$      call RadiationDcpamESWV2Flux(                                 &
!!$        & xy_SurfAlbedo,                                                  &
!!$        & xyz_Press, xyr_Press, xyz_Temp, xyz_QH2OVap, xyz_QO3, xyz_Height,  &
!!$        & xyr_RadSFlux                                                    &
!!$        & )
!!$    case ( 1 )
      ! dcpam 地球大気向け短波放射モデル Ver. 2.1
      ! dcpam short wave radiation model for the Earth's atmosphere Ver. 2.1
      !
      call RadiationDcpamESWV21Flux( xy_SurfAlbedo, xyz_Press, xyr_Press, xyz_Temp, xyz_QH2OVap, xyz_QH2OLiq, xyz_QH2OSol, xyz_QO3, xyr_RadSFlux )
!!$    case default
!!$      call MessageNotify( 'E', module_name, 'SW model version %d is not supported.', i = (/ LWVer /) )
!!$    end select

!!$    select case ( LWVer )
!!$    case ( 0 )
!!$      call RadiationDcpamELWV2Flux( &
!!$        & xyz_Press, xyr_Press, xyz_Temp, xy_SurfTemp,                    & ! (in )
!!$        & xyz_QH2OVap, xyz_QO3,                                           & ! (in )
!!$        & xyr_RadLFlux, xyra_DelRadLFlux                                  & ! (out)
!!$        & )
!!$    case ( 1 )
!!$      call RadiationDcpamELWV21Flux( &
!!$        & xyz_Press, xyr_Press, xyz_Temp, xy_SurfTemp,                    & ! (in )
!!$        & xyz_QH2OVap, xyz_QO3,                                           & ! (in )
!!$        & xyr_RadLFlux, xyra_DelRadLFlux                                  & ! (out)
!!$        & )
!!$    case ( 2 )
!!$      call RadiationDcpamELWV22Flux( &
!!$        & xyz_Press, xyr_Press, xyz_Temp, xy_SurfTemp,                    & ! (in )
!!$        & xyz_QH2OVap, xyz_QO3,                                           & ! (in )
!!$        & xyr_RadLFlux, xyra_DelRadLFlux                                  & ! (out)
!!$        & )
!!$    case ( 3 )
      call RadiationDcpamELWV23Flux( xyz_Press, xyr_Press, xyz_Temp, xy_SurfTemp, xyz_QH2OVap, xyz_QH2OLiq, xyz_QH2OSol, xyz_QO3, xyr_RadLFlux, xyra_DelRadLFlux )
!!$    case default
!!$      call MessageNotify( 'E', module_name, 'LW model version %d is not supported.', i = (/ LWVer /) )
!!$    end select


  end subroutine RadiationDcpamEV2Flux
radiation_dcpam_E_V2_inited
Variable :
radiation_dcpam_E_V2_inited = .false. :logical, save, public
: 初期設定フラグ. Initialization flag

Private Instance methods

Subroutine :

[Source]

  subroutine RadiationDcpamEV2Init

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify


    ! 宣言文 ; Declaration statements
    !

!!$    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
!!$                              ! Unit number for NAMELIST file open
!!$    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
!!$                              ! IOSTAT of NAMELIST read

!!$    ! NAMELIST 変数群
!!$    ! NAMELIST group name
!!$    !
!!$    namelist /radiation_dcpam_EV2_nml/ &
!!$      & SWVer, LWVer
!!$          !
!!$          ! デフォルト値については初期化手続 "radiation_dcpam_EV2#RadiationDcpamEV2Init"
!!$          ! のソースコードを参照のこと.
!!$          !
!!$          ! Refer to source codes in the initialization procedure
!!$          ! "radiation_dcpam_EV2#RadiationDcpamEV2Init" for the default values.
!!$          !


    ! デフォルト値の設定
    ! Default values settings
    !
!!$    SWVer = 1
!!$    LWVer = 3


!!$    ! NAMELIST の読み込み
!!$    ! NAMELIST is input
!!$    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml,                     & ! (in)
!!$        & nml = radiation_dcpam_EV2_nml,  & ! (out)
!!$        & iostat = iostat_nml )             ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$    end if


    ! Allocate a local variable for O3 distribution
    !
    allocate( xyz_QO3(0:imax-1, 1:jmax, 1:kmax) )


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
!!$    call MessageNotify( 'M', module_name, 'SWVer = %d', i = (/ SWVer /) )
!!$    call MessageNotify( 'M', module_name, 'LWVer = %d', i = (/ LWVer /) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )


    radiation_dcpam_E_V2_inited = .true.

  end subroutine RadiationDcpamEV2Init
module_name
Constant :
module_name = ‘radiation_dcpam_E_V2 :character(*), parameter
: モジュールの名称. Module name
version
Constant :
version = ’$Name: dcpam5-20110225-4 $’ // ’$Id: radiation_dcpam_E_V2.f90,v 1.3 2011-02-21 12:15:37 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version
xyz_QO3
Variable :
xyz_QO3(:,:,:) :real(DP), allocatable, save
: O3 分布 (1) O3 distribution (1)