Class set_1d_profile
In: prepare_data/set_1d_profile.f90

Methods

Included Modules

dc_types gridset gtool_history netcdf_wrapper namelist_util dc_message dc_iounit

Public Instance methods

Subroutine :
xyz_Press(0:imax-1,1:jmax,1:kmax) :real(DP), intent(in )
xyz_Temp(0:imax-1,1:jmax,1:kmax) :real(DP), intent(out)
xyz_QVap(0:imax-1,1:jmax,1:kmax) :real(DP), intent(out)

[Source]

  subroutine Set1DProfileAtm( xyz_Press, xyz_Temp, xyz_QVap )

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level


    real(DP), intent(in ) :: xyz_Press(0:imax-1,1:jmax,1:kmax)
    real(DP), intent(out) :: xyz_Temp (0:imax-1,1:jmax,1:kmax)
    real(DP), intent(out) :: xyz_QVap (0:imax-1,1:jmax,1:kmax)


    !
    ! local variables
    !
    real(DP), allocatable :: a_InLogQH2O(:)


    ! 初期化
    ! Initialization
    !
    if ( .not. set_1d_profile_inited ) call Set1DProfileInit


    call Set1DProfileInterpolate( Inkmax, a_InPress, a_InTemp, xyz_Press, xyz_Temp )


    allocate( a_InLogQH2O( Inkmax ) )
    a_InLogQH2O = log( a_InQH2O )

    call Set1DProfileInterpolate( Inkmax, a_InPress, a_InLogQH2O, xyz_Press, xyz_QVap )
    xyz_QVap(:,:,:) = exp( xyz_QVap(:,:,:) )

    deallocate( a_InLogQH2O )



  end subroutine Set1DProfileAtm
Subroutine :
xyz_Press(0:imax-1,1:jmax,1:kmax) :real(DP), intent(in )
xyz_QO3(0:imax-1,1:jmax,1:kmax) :real(DP), intent(out)

[Source]

  subroutine Set1DProfileO3( xyz_Press, xyz_QO3 )

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    real(DP), intent(in ) :: xyz_Press(0:imax-1,1:jmax,1:kmax)
    real(DP), intent(out) :: xyz_QO3  (0:imax-1,1:jmax,1:kmax)


    !
    ! local variables
    !
    real(DP), allocatable :: a_InLogQO3(:)


    ! 初期化
    ! Initialization
    !
    if ( .not. set_1d_profile_inited ) call Set1DProfileInit


    allocate( a_InLogQO3( Inkmax ) )
    a_InLogQO3 = log( a_InQO3 )

    call Set1DProfileInterpolate( Inkmax, a_InPress, a_InLogQO3, xyz_Press, xyz_QO3 )

    xyz_QO3(:,:,:) = exp( xyz_QO3(:,:,:) )

    deallocate( a_InLogQO3 )


  end subroutine Set1DProfileO3
Subroutine :
xy_Ps(0:imax-1,1:jmax) :real(DP), intent(out)

[Source]

  subroutine Set1DProfilePs( xy_Ps )

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    real(DP), intent(out) :: xy_Ps(0:imax-1,1:jmax)


    !
    ! local variables
    !

    ! 初期化
    ! Initialization
    !
    if ( .not. set_1d_profile_inited ) call Set1DProfileInit


    xy_Ps = a_InPress(1)


  end subroutine Set1DProfilePs
Subroutine :
xy_SurfTemp(0:imax-1,1:jmax) :real(DP), intent(out)

[Source]

  subroutine Set1DProfileSurfTemp( xy_SurfTemp )

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    real(DP), intent(out) :: xy_SurfTemp(0:imax-1,1:jmax)


    !
    ! local variables
    !

    ! 初期化
    ! Initialization
    !
    if ( .not. set_1d_profile_inited ) call Set1DProfileInit


    xy_SurfTemp = a_InTemp(1)


  end subroutine Set1DProfileSurfTemp
set_1d_profile_inited
Variable :
set_1d_profile_inited = .false. :logical, save, public
: 初期設定フラグ. Initialization flag

Private Instance methods

InFileName
Variable :
InFileName :character(len=STRING), save
Inkmax
Variable :
Inkmax :integer , save
Subroutine :

This procedure input/output NAMELIST#set_1d_profile_nml .

[Source]

  subroutine Set1DProfileInit

    ! gtool データ入力
    ! Gtool data input
    !
    use gtool_history, only: HistoryGet, HistoryGetAttr

    ! NetCDF のラッパープログラム
    ! NetCDF wrapper
    !
    use netcdf_wrapper, only : NWInqDimLen

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen


    ! 宣言文 ; Declaration statements
    !
    logical :: flag_mpi_init

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /set_1d_profile_nml/ InFileName
          !
          ! デフォルト値については初期化手続 "set_1d_profile#Set1DProfileInit"
          ! のソースコードを参照のこと.
          !
          ! Refer to source codes in the initialization procedure
          ! "set_1d_profile#Set1DProfileInit" for the default values.
          !


    ! デフォルト値の設定
    ! Default values settings
    !
    InFileName = 'data.nc'

    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = set_1d_profile_nml, iostat = iostat_nml )             ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if


    call NWInqDimLen( InFileName, 'plev', Inkmax )

    allocate( a_InPress( Inkmax ) )
    allocate( a_InTemp ( Inkmax ) )
    allocate( a_InQH2O ( Inkmax ) )
    allocate( a_InQO3  ( Inkmax ) )


    flag_mpi_init = .true.

    call HistoryGet( InFileName, 'plev', a_InPress, flag_mpi_split = flag_mpi_init )

    call HistoryGet( InFileName, 'Temp', a_InTemp, flag_mpi_split = flag_mpi_init )

    call HistoryGet( InFileName, 'QH2O', a_InQH2O, flag_mpi_split = flag_mpi_init )

    call HistoryGet( InFileName, 'QO3', a_InQO3, flag_mpi_split = flag_mpi_init )


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, 'InFileName = %c', c1 = trim(InFileName) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )


    set_1d_profile_inited = .true.


  end subroutine Set1DProfileInit
Subroutine :
NLev :integer , intent(in )
a_Press(1:NLev) :real(DP), intent(in )
a_Array(1:NLev) :real(DP), intent(in )
xyz_Press(0:imax-1,1:jmax,1:kmax) :real(DP), intent(in )
xyz_Array(0:imax-1,1:jmax,1:kmax) :real(DP), intent(out)

[Source]

  subroutine Set1DProfileInterpolate( NLev, a_Press, a_Array, xyz_Press, xyz_Array )

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    integer , intent(in ) :: NLev
    real(DP), intent(in ) :: a_Press  (1:NLev)
    real(DP), intent(in ) :: a_Array  (1:NLev)
    real(DP), intent(in ) :: xyz_Press(0:imax-1,1:jmax,1:kmax)
    real(DP), intent(out) :: xyz_Array(0:imax-1,1:jmax,1:kmax)


    !
    ! local variables
    !
    integer :: k, kk


    ! 初期化
    ! Initialization
    !
    if ( .not. set_1d_profile_inited ) call Set1DProfileInit


    do k = 1, kmax
      if( xyz_Press(0,1,k) <= a_Press(NLev) ) then
        xyz_Array(0,1,k) = a_Array(NLev)
      else
        search_loop : do kk = 2, Inkmax
          if( a_Press( kk ) < xyz_Press(0,1,k) ) exit search_loop
        end do search_loop
        if( kk > NLev ) stop 'Unexpected error in setting temperature profile'
        xyz_Array(0,1,k) = ( a_Array( kk ) - a_Array( kk-1 ) ) / ( log( a_Press( kk )    / a_Press( kk-1 ) ) ) * ( log( xyz_Press(0,1,k) / a_Press( kk-1 ) ) ) + a_Array( kk-1 )
      end if
    end do

    do k = 1, kmax
      xyz_Array(:,:,k) = xyz_Array(0,1,k)
    end do


  end subroutine Set1DProfileInterpolate
a_InPress
Variable :
a_InPress(:) :real(DP), allocatable, save
a_InQH2O
Variable :
a_InQH2O(:) :real(DP), allocatable, save
a_InQO3
Variable :
a_InQO3(:) :real(DP), allocatable, save
a_InTemp
Variable :
a_InTemp(:) :real(DP), allocatable, save
module_name
Constant :
module_name = ‘radiation_dcpam_E_SW_V2‘ :character(*), parameter
: モジュールの名称. Module name
version
Constant :
version = ’$Name: dcpam5-20110615 $’ // ’$Id: set_1d_profile.f90,v 1.1 2010-12-18 12:54:43 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version