Class initial_data
In: prepare_data/initial_data.F90

初期値データ (リスタートデータ) 提供

Prepare initial data (restart data)

初期値データ (リスタートデータ) のサンプルを提供します.

現在は以下のデータを提供します.

  • Small Disturbance of Temperature
    • 風速: 0 [m/s], 地表面気圧: 1.0e+5 [Pa], 比湿: 1.0e-10 [kg kg-1]
    • 温度: 250 [K] に微小擾乱を加えたもの
  • [AGCM 5.3]{www.gfd-dennou.org/library/agcm5} Default
    • 風速: 0 [m/s], 地表面気圧: 1.0e+5 [Pa], 比湿: 1.0e-10 [kg kg-1]
    • 温度: 250 [K] に微小擾乱を加えたもの
  • Sugiyama et al. (2008)
    • 木星大気を想定した, Sugiyama et al. (2008) で用いられていた 初期値を模倣する.
    • 風速: 0 [m/s], 地表面気圧: 3.0e+6 [Pa]
    • 温度: $ sigma = 1 $ で 490 [K] とし, 気圧 1.0e+4 となる高度まで, 温位一定で (乾燥断熱線に沿って) 高度に伴い温度を減少させる. 気圧 1.0e+4 以下の高度では温度一定とする.
    • 比湿: $ sigma = 1 $ で 6.11641e-3 [kg kg-1] とし, 比湿が飽和比湿の 75 % となる高度までは一定とする. その高度以上では, 比湿を飽和比湿の 75 % とする.

Prepare sample data of initial data (restart data)

Now, following data are provided.

  • Small Disturbance of Temperature
    • Velocity: 0 [m/s], Surface pressure: 1.0e+5 [Pa], Specific humidity: 1.0e-10 [kg kg-1]
    • Temperature: 250 [K] and perturbation
  • [AGCM 5.3]{www.gfd-dennou.org/library/agcm5} Default
    • Velocity: 0 [m/s], Surface pressure: 1.0e+5 [Pa], Specific humidity: 1.0e-10 [kg kg-1]
    • Temperature: 250 [K] and perturbation
  • Sugiyama et al. (2008)
    • Initial data like a Jovian atmosphere that is used in Sugiyama et al. (2008) is imitated.
    • Velocity: 0 [m/s], Surface pressure: 3.0e+6 [Pa]
    • Temperature: 490 [K] at $ sigma = 1 $ . And it is declined with constant potential temperature (along dry adiabat line) below where air pressure is 1.0e+4. It is constant above where air pressure is 1.0e+4.
    • Specific humidity: 6.11641e-3 [kg kg-1] at $ sigma = 1 $ . And it is constant below where it is same as 75 % of saturation specific humidity. Above that, specific humidity is 75 % of saturation specific humidity.

Procedures List

InitDataGet :初期値データ (リスタートデータ) 取得
———— :————
InitDataGet :Get initial data (restart data)

NAMELIST

NAMELIST#initial_data_nml

Methods

Included Modules

gridset dc_types dc_message axesset constants saturate_nha1992 saturate_t1930 dc_string namelist_util dc_iounit

Public Instance methods

Subroutine :
xyz_UB(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ u (t-\Delta t) $ . 東西風速. Eastward wind
xyz_VB(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ v (t-\Delta t) $ . 南北風速. Northward wind
xyz_TempB(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ T (t-\Delta t) $ . 温度. Temperature
xyz_QVapB(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ q (t-\Delta t) $ . 比湿. Specific humidity
xy_PsB(0:imax-1, 1:jmax) :real(DP), intent(out)
: $ p_s (t-\Delta t) $ . 地表面気圧. Surface pressure
xyz_UN(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ u (t) $ . 東西風速. Eastward wind
xyz_VN(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ v (t) $ . 南北風速. Northward wind
xyz_TempN(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ T (t) $ . 温度. Temperature
xyz_QVapN(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: $ q (t) $ . 比湿. Specific humidity
xy_PsN(0:imax-1, 1:jmax) :real(DP), intent(out)
: $ p_s (t) $ . 地表面気圧. Surface pressure

初期値データ (リスタートデータ) のサンプルを提供します.

Prepare sample data of initial data (restart data)

[Source]

  subroutine InitDataGet( xyz_UB, xyz_VB, xyz_TempB, xyz_QVapB, xy_PsB, xyz_UN, xyz_VN, xyz_TempN, xyz_QVapN, xy_PsN )
    !
    ! 初期値データ (リスタートデータ) のサンプルを提供します. 
    ! 
    ! Prepare sample data of initial data (restart data)
    !

    ! モジュール引用 ; USE statements
    !

    ! 座標データ設定
    ! Axes data settings
    !
    use axesset, only: x_Lon, y_Lat, z_Sigma
                              ! $ \sigma $ レベル (整数). 
                              ! Full $ \sigma $ level

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: CpDry, GasRDry               ! $ R $ [J kg-1 K-1]. 
                              ! 乾燥大気の気体定数. 
                              ! Gas constant of air

    ! 飽和比湿計算
    ! Evaluate saturation specific humidity
    !
#ifdef LIB_SATURATE_NHA1992
    use saturate_nha1992, only: CalcQVapSat
#elif LIB_SATURATE_T1930
    use saturate_t1930, only: CalcQVapSat
#else
    use saturate_t1930, only: CalcQVapSat
#endif

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: LChar

    ! 宣言文 ; Declaration statements
    !
    implicit none
    real(DP), intent(out):: xyz_UB  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ u (t-\Delta t) $ .   東西風速. Eastward wind
    real(DP), intent(out):: xyz_VB  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ v (t-\Delta t) $ .   南北風速. Northward wind
    real(DP), intent(out):: xyz_TempB  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ T (t-\Delta t) $ .   温度. Temperature
    real(DP), intent(out):: xyz_QVapB  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ q (t-\Delta t) $ .   比湿. Specific humidity
    real(DP), intent(out):: xy_PsB (0:imax-1, 1:jmax)
                              ! $ p_s (t-\Delta t) $ . 地表面気圧. Surface pressure
    real(DP), intent(out):: xyz_UN  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ u (t) $ .     東西風速. Eastward wind
    real(DP), intent(out):: xyz_VN  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ v (t) $ .     南北風速. Northward wind
    real(DP), intent(out):: xyz_TempN  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ T (t) $ .     温度. Temperature
    real(DP), intent(out):: xyz_QVapN  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ q (t) $ .     比湿. Specific humidity
    real(DP), intent(out):: xy_PsN (0:imax-1, 1:jmax)
                              ! $ p_s (t) $ .   地表面気圧. Surface pressure

    ! Sugiyama et al. (2008) 用作業変数
    ! Work variables for Sugiyama et al. (2008)
    !
    real(DP):: xyz_PotTemp (0:imax-1, 1:jmax, 1:kmax)
                              ! 温位. Potential temperature
    real(DP):: xyz_Press (0:imax-1, 1:jmax, 1:kmax)
                              ! 気圧. Air pressure
    real(DP):: xy_TempMin (0:imax-1, 1:jmax)
                              ! 温度の最小値. Minimum value of temperature
    real(DP):: xyz_QVapSat (0:imax-1, 1:jmax, 1:kmax)
                              ! 飽和比湿. Saturation specific humidity

    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude
    integer:: k               ! 鉛直方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in vertical direction

    ! 実行文 ; Executable statement

    if ( .not. initial_data_inited ) call InitDataInit

    ! 微小な温度擾乱のある静止場
    ! Stationary field with small disturbance of temperature
    !
    select case ( LChar( trim(Pattern) ) )
    case ( 'small disturbance of temperature' )
      xyz_UB    = 0.0_DP
      xyz_VB    = 0.0_DP
      xyz_TempB = TempAvr
      xy_PsB    = PsAvr
      xyz_QVapB = QVapAvr

      ! 温度に擾乱を与える
      ! Add perturbation to temperature
      !
      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax - 1
            xyz_TempB(i,j,k) = xyz_TempB(i,j,k) + 0.1_DP * sin ( x_Lon(i) * y_Lat(j) ) - 0.1_DP * ( 1.0_DP - z_Sigma(k) )
          end do
        end do
      end do

      ! 東西風速を与える
      ! Add eastward wind
      !
      do j = 1, jmax
        xyz_UB(:,j,:) = Ueq * cos(y_Lat(j))
      end do

      ! ステップ $ t-\Delta t $ のデータをステップ $ t $ へコピー
      ! Copy data on step $ t-\Delta t $ to step $ t $ 
      !
      xyz_UN    = xyz_UB   
      xyz_VN    = xyz_VB   
      xyz_TempN = xyz_TempB
      xy_PsN    = xy_PsB   
      xyz_QVapN = xyz_QVapB

    ! AGCM5.3 のデフォルト初期値
    ! AGCM5.3 default initial values
    !
    case ( 'agcm 5.3 default' )
      xyz_UB    = 0.0_DP
      xyz_VB    = 0.0_DP
      xyz_TempB = TempAvr
      xy_PsB    = PsAvr
      xyz_QVapB = QVapAvr

      ! 温度に擾乱を与える
      ! Add perturbation to temperature
      !
      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax - 1
            xyz_TempB(i,j,k) = xyz_TempB(i,j,k) + 0.1_DP * sin ( real( ( i + 1 ) * ( jmax - j + 1 ) * ( kmax - k ), DP ) / real( imax * jmax * kmax, DP ) * 10.0_DP )
          end do
        end do
      end do

      ! 東西風速を与える
      ! Add eastward wind
      !
      do j = 1, jmax
        xyz_UB(:,j,:) = Ueq * cos(y_Lat(j))
      end do

      ! ステップ $ t-\Delta t $ のデータをステップ $ t $ へコピー
      ! Copy data on step $ t-\Delta t $ to step $ t $ 
      !
      xyz_UN    = xyz_UB   
      xyz_VN    = xyz_VB   
      xyz_TempN = xyz_TempB
      xy_PsN    = xy_PsB   
      xyz_QVapN = xyz_QVapB

    ! Sugiyama et al. (2008) の初期値
    ! Initial values of Sugiyama et al. (2008)
    !
    case ( 'sugiyama et al. (2008)' )
      xyz_UB    = 0.0_DP
      xyz_VB    = 0.0_DP
      xyz_TempB = TempAvr
      xy_PsB    = PsAvr
      xyz_QVapB = QVapAvr

      ! 温度の計算
      ! Calculate temperature
      !
      xyz_PotTemp = TempAvr
      xy_TempMin  = TempAvr

      do k = 1, kmax
        xyz_TempB(:,:,k) = xyz_PotTemp(:,:,k) * ( z_Sigma(k) )**( GasRDry / CpDry )

        if ( PsAvr * z_Sigma(k) < 1.0e+4_DP ) then
          xyz_TempB(:,:,k) = xy_TempMin
        else
          xy_TempMin = xyz_TempB(:,:,k)
        end if
      end do

      ! 温度に擾乱を与える
      ! Add perturbation to temperature
      !
      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax - 1
            xyz_TempB(i,j,k) = xyz_TempB(i,j,k) + 0.1_DP * sin ( real( ( i + 1 ) * ( jmax - j + 1 ) * ( kmax - k ), DP ) / real( imax * jmax * kmax, DP ) * 10.0_DP )
          end do
        end do
      end do

      ! 飽和比湿計算
      ! Calculate saturation specific humidity
      !
      do k = 1, kmax
        xyz_Press(:,:,k) = xy_PsB * z_Sigma(k)
      end do

      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax - 1
            xyz_QVapSat(i,j,k) = CalcQVapSat( xyz_TempB(i,j,k), xyz_Press(i,j,k) )
          end do
        end do
      end do

      ! 比湿の計算
      ! Calculate specific humidity
      !
      where ( xyz_QVapB > xyz_QVapSat * 0.75 )
        xyz_QVapB = xyz_QVapSat * 0.75
      end where

      ! ステップ $ t-\Delta t $ のデータをステップ $ t $ へコピー
      ! Copy data on step $ t-\Delta t $ to step $ t $ 
      !
      xyz_UN    = xyz_UB   
      xyz_VN    = xyz_VB   
      xyz_TempN = xyz_TempB
      xy_PsN    = xy_PsB   
      xyz_QVapN = xyz_QVapB

    end select

  end subroutine InitDataGet
Pattern
Variable :
Pattern :character(STRING), save, public
: 初期値データのパターン. 以下のパターンを選択可能.

Initial data pattern Available patterns are as follows.

  • "Small Disturbance of Temperature" (default value)
  • "AGCM 5.3 Default"
  • "Sugiyama et al. (2008)"
PsAvr
Variable :
PsAvr :real(DP), save, public
: $ bar{p_s} $ . 地表面気圧平均値. Mean surface pressure
QVapAvr
Variable :
QVapAvr :real(DP), save, public
: $ bar{q} $ . 比湿平均値. Mean specific humidity
TempAvr
Variable :
TempAvr :real(DP), save, public
: $ bar{T} $ . 温度平均値. Mean temperature
Ueq
Variable :
Ueq :real(DP), save, public
: $ u_{eq} $ . 赤道上の東西風速. Eastward wind on the equator
initial_data_inited
Variable :
initial_data_inited = .false. :logical, save, public
: 初期設定フラグ. Initialization flag

Private Instance methods

Subroutine :

依存モジュールの初期化チェック

Check initialization of dependency modules

[Source]

  subroutine InitCheck
    !
    ! 依存モジュールの初期化チェック
    !
    ! Check initialization of dependency modules

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_util_inited

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: gridset_inited

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: constants_inited

    ! 座標データ設定
    ! Axes data settings
    !
    use axesset, only: axesset_inited


    ! 実行文 ; Executable statement

    if ( .not. namelist_util_inited ) call MessageNotify( 'E', module_name, '"namelist_util" module is not initialized.' )

    if ( .not. gridset_inited ) call MessageNotify( 'E', module_name, '"gridset" module is not initialized.' )

    if ( .not. constants_inited ) call MessageNotify( 'E', module_name, '"constants" module is not initialized.' )

    if ( .not. axesset_inited ) call MessageNotify( 'E', module_name, '"axesset" module is not initialized.' )

  end subroutine InitCheck
Subroutine :

This procedure input/output NAMELIST#initial_data_nml .

[Source]

  subroutine InitDataInit

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: LChar

    ! 宣言文 ; Declaration statements
    !
    implicit none

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /initial_data_nml/ Pattern, TempAvr, PsAvr, QVapAvr, Ueq
          !
          ! デフォルト値については初期化手続 "initial_data#InitDataInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "initial_data#InitDataInit" for the default values. 
          !


    ! 実行文 ; Executable statement

    if ( initial_data_inited ) return
    call InitCheck

    ! デフォルト値の設定 (まずは Pattern のみ)
    ! Default values settings (At first, "Pattern" only)
    !
    Pattern = 'Small Disturbance of Temperature'
    !Pattern = 'AGCM 5.3 Default'

    ! NAMELIST の読み込み (まずは Pattern のみ)
    ! NAMELIST is input (At first, "Pattern" only)
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = initial_data_nml, iostat = iostat_nml )     ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if

    ! デフォルト値の設定
    ! Default values settings
    !
    select case ( LChar( trim(Pattern) ) )
    case ( 'small disturbance of temperature' )
      TempAvr = 250.0_DP
      PsAvr   = 1.0e+5_DP
      QVapAvr = 1.0e-10_DP
      Ueq     = 0.0_DP
    case ( 'agcm 5.3 default' )
      TempAvr = 250.0_DP
      PsAvr   = 1.0e+5_DP
      QVapAvr = 1.0e-10_DP
      Ueq     = 0.0_DP
    case ( 'sugiyama et al. (2008)' )
      TempAvr = 490.0_DP
      PsAvr   = 3.0e+6_DP
      QVapAvr = 6.11641e-3_DP
      Ueq     = 0.0_DP
    case default
      call MessageNotify( 'E', module_name, 'Pattern=<%c> is invalid.', c1 = trim(Pattern) )
    end select

    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = initial_data_nml, iostat = iostat_nml )     ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, '  Pattern = %c', c1 = trim(Pattern) )
    call MessageNotify( 'M', module_name, '  TempAvr = %f', d = (/ TempAvr  /) )
    call MessageNotify( 'M', module_name, '  PsAvr   = %f', d = (/ PsAvr  /) )
    call MessageNotify( 'M', module_name, '  QVapAvr = %f', d = (/ QVapAvr  /) )
    call MessageNotify( 'M', module_name, '  Ueq     = %f', d = (/ Ueq  /) )
    call MessageNotify( 'M', module_name, '' )
    call MessageNotify( 'M', module_name, '  Scheme of saturation = %c', c1 = saturate_scheme )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    initial_data_inited = .true.
  end subroutine InitDataInit
module_name
Constant :
module_name = ‘initial_data :character(*), parameter
: モジュールの名称. Module name
saturate_scheme
Constant :
saturate_scheme = ifdef LIB_SATURATE_NHA1992 elif LIB_SATURATE_T1930 else endif :character(*), parameter
version
Constant :
version = ’$Name: dcpam5-20090225-2 $’ // ’$Id: initial_data.F90,v 1.2 2009-02-03 14:45:58 morikawa Exp $’ :character(*), parameter
: モジュールのバージョン Module version

[Validate]