!--
! *** Caution!! ***
!
! This file is generated from "dc_string.rb2f90" by Ruby 1.8.2.
! Please do not edit this file directly.
!
! [JAPANESE]
!
! ※※※ 注意!!! ※※※
!
! このファイルは "dc_string.rb2f90" から Ruby 1.8.2
! によって自動生成されたファイルです.
! このファイルを直接編集しませんようお願い致します.
!
!
!++
!
!== character/string type support routines
!
! Authors:: Yasuhiro MORIKAWA, Eizi TOYODA
! Version:: $Id: dc_string.f90,v 1.13 2006/12/12 19:49:56 morikawa Exp $
! Tag Name:: $Name: gt4f90io-20070417 $
! Copyright:: Copyright (C) GFD Dennou Club, 2000-2005. All rights reserved.
! License:: See COPYRIGHT[link:../../COPYRIGHT]
!
! This file provides dc_string
!
module dc_string
!
!== Overview
!
! character/string type support routines
!
! dc_string は文字列を操作するためのサブルーチン群を持つモジュールです。
!
!== Procedures Summary
!
! 手続き群の要約
!
! StoI :: 文字型を整数型に変換
! StoD :: 文字型を倍精度実数型に変換
! StoA :: 文字型を文字型配列に変換
! Get_Array :: 文字型を整数型配列、単精度実数型配列、倍精度実数型配列に変換
! Str_to_Logical :: 文字型を論理型に変換
! toChar :: 数値型、論理型を文字型に変換
! Split :: 文字列の分割
! JoinChar :: 文字型配列の連結
! Concat :: 文字型配列の末尾に文字を連結
! Index_Ofs :: オフセットした文字列の重複探査 (Index 関数の拡張版)
! Replace :: 文字列置換
! toUpper :: 文字列を大文字へ変換 (サブルーチン)
! UChar :: 文字列を大文字へ変換 (関数)
! toLower :: 文字列を小文字へ変換 (サブルーチン)
! LChar :: 文字列を小文字へ変換 (関数)
! StriEq :: 文字列の比較 (大文字小文字を無視)
! StrHead :: 文字列の比較 (先頭部分のみの比較)
! StrInclude :: 文字型配列内の検査
! CPrintf :: データを整形して文字列として返す
! Printf :: データを整形して出力
!!$ use dcstring_base !:nodoc:
!!$ use dcstring_list !:nodoc:
use dc_types, only: TOKEN, STRING, DP
implicit none
private
!!$ public VSTRING, len, var_str, vchar, get, put, put_line, &
!!$ & assignment(=), operator(==), operator(/=), &
!!$ & operator(<), operator(<=), operator(>), operator(>=), &
!!$ & vindex, vscan, vverify, extract, split, &
!!$ & operator(.cat.)
!!$ public:: STRING_LIST, init, clear, dispose
!!$ public:: push, pop, shift, unshift
!!$ public:: element
!== 文字から数値への変換
!
public:: StoI
interface StoI
module procedure atoi_scalar
!!$ module procedure stoi_scalar
end interface
public:: StoD
interface StoD
module procedure atod_scalar
!!$ module procedure stod_scalar
end interface
public:: get_array
interface get_array
module procedure str2ip !, strv2ip
module procedure str2rp !, strv2rp
module procedure str2dp !, strv2dp
end interface
public:: Str_to_Logical
interface Str_to_Logical
module procedure str2bool
end interface
!== 数値から文字への変換
!
! VAR_STR と同名にすべきかもしれない
!
public:: toChar
interface toChar
module procedure itoa_scalar
module procedure itoa_array
module procedure rtoa_scalar
module procedure rtoa_array
module procedure dtoa_scalar
module procedure dtoa_array
module procedure ltoa_scalar
module procedure ltoa_array
end interface
!== 文字型配列の連結
!
public:: JoinChar
!== 文字型配列の末尾に文字を連結
!
public:: Concat
interface Concat
module procedure concat_tail
end interface
!== 長さの異なる文字群の配列化
!
public :: StoA
interface StoA
module procedure Str_to_Array1
module procedure Str_to_Array2
module procedure Str_to_Array3
module procedure Str_to_Array4
module procedure Str_to_Array5
module procedure Str_to_Array6
module procedure Str_to_Array7
module procedure Str_to_Array8
module procedure Str_to_Array9
module procedure Str_to_Array10
module procedure Str_to_Array11
module procedure Str_to_Array12
end interface
!== 文字列の分解
!
public Split
interface Split
module procedure Split_CC
end interface
!== 文字列の解析
!
public:: Index_Ofs
public:: Replace
!== 大文字・小文字を無視した処理
!
public:: toUpper
interface toUpper
module procedure cupper
end interface
public:: toLower
interface toLower
module procedure clower
end interface
public:: UChar
interface UChar
module procedure UChar
end interface
public:: LChar
interface LChar
module procedure LChar
end interface
public:: StriEq
interface StriEq
!!$ module procedure StriEq_sc
module procedure StriEq_cc
end interface
public:: StrHead
interface StrHead
!!$ module procedure StrHead_sc
module procedure StrHead_cc
end interface
public:: StrInclude
interface StrInclude
module procedure Str_Include_ac
end interface
!== 印字のための文字処理
!
public:: GTStringQuoteForDcl
interface
function GTStringQuoteForDcl(string) result(result)
use dc_types, only: STRLEN => STRING
character(*), intent(in):: string
character(STRLEN):: result
end function GTStringQuoteForDcl
end interface
public:: CPrintf
interface CPrintf
function &
& DCStringCPrintf(fmt, i, r, d, L, n, c1, c2, c3, ca) result(result)
use dc_types, only: STRING, DP
character(len = STRING):: result
character(*), intent(in):: fmt
integer, intent(in), optional:: i(:), n(:)
real, intent(in), optional:: r(:)
real(DP), intent(in), optional:: d(:)
logical, intent(in), optional:: L(:)
character(*), intent(in), optional:: c1, c2, c3
character(*), intent(in), optional:: ca(:)
end function DCStringCPrintf
end interface
public:: Printf
interface Printf
subroutine DCStringSPrintf(unit, fmt, i, r, d, L, n, c1, c2, c3, ca)
use dc_types, only: DP
character(*), intent(out):: unit
character(*), intent(in):: fmt
integer, intent(in), optional:: i(:), n(:)
real, intent(in), optional:: r(:)
real(DP), intent(in), optional:: d(:)
logical, intent(in), optional:: L(:)
character(*), intent(in), optional:: c1, c2, c3
character(*), intent(in), optional:: ca(:)
end subroutine DCStringSPrintf
!!$ subroutine DCStringPrintf(unit, fmt, i, r, d, L, n, c1, c2, c3, ca)
!!$ use dc_types, only: DP
!!$ type(VSTRING), intent(out):: unit
!!$ character(*), intent(in):: fmt
!!$ integer, intent(in), optional:: i(:), n(:)
!!$ real, intent(in), optional:: r(:)
!!$ real(DP), intent(in), optional:: d(:)
!!$ logical, intent(in), optional:: L(:)
!!$ character(*), intent(in), optional:: c1, c2, c3
!!$ character(*), intent(in), optional:: ca(:)
!!$ end subroutine DCStringPrintf
subroutine DCStringFPrintf(unit, fmt, i, r, d, L, n, c1, c2, c3, ca)
use dc_types, only: DP
integer, intent(in), optional:: unit
character(*), intent(in):: fmt
integer, intent(in), optional:: i(:), n(:)
real, intent(in), optional:: r(:)
real(DP), intent(in), optional:: d(:)
logical, intent(in), optional:: L(:)
character(*), intent(in), optional:: c1, c2, c3
character(*), intent(in), optional:: ca(:)
end subroutine DCStringFPrintf
end interface
contains
!== 正規表現があれば....
!
!!$ logical function StrHead_SC(whole, head) result(result)
!!$ type(VSTRING) , intent(in) :: whole
!!$ character(len = *), intent(in) :: head
!!$ continue
!!$ result = (extract(whole, 1, len(head)) == head)
!!$ end function
logical function StrHead_CC(whole, head) result(result)
!
! 文字列 head と文字列 whole の先頭部分 (head と同じ文字列長)
! とを比較し、同じものならば .true. を、異なる場合には .false.
! を返します。 whole の文字列長が head の文字列長よりも短い場合には
! .false. を返します。
!
character(len = *), intent(in):: whole
character(len = *), intent(in):: head
continue
result = (len(whole) >= len(head))
if (.not. result) return
result = (whole(1:len(head)) == head)
end function StrHead_CC
logical function StriEq_cc(string_a, string_b) result(result)
!
! 大文字・小文字を無視して文字列の比較を行います。
! 文字列 string_a と文字列 string_b を比較し、同じものならば
! .true. を、異なる場合には .false. を返します。
!
!--
! ※ 注意書き ※
!
! コンパイラによっては character(len = len(string_a)):: abuf
! が通らないため, 文字数を string = 500 で制限
!++
!
character(len = *), intent(in):: string_a
character(len = *), intent(in):: string_b
character(len = STRING):: abuf
character(len = STRING):: bbuf
!!$ character(len = len(string_a)):: abuf
!!$ character(len = len(string_b)):: bbuf
abuf = string_a
bbuf = string_b
call toUpper(abuf)
call toUpper(bbuf)
result = (abuf == bbuf)
end function StriEq_cc
!!$ logical function StriEq_sc(string_a, string_b) result(result) !:nodoc:
!!$ type(VSTRING), intent(in):: string_a
!!$ character(len = *), intent(in):: string_b
!!$ result = StriEq_cc(string_a%body(1:string_a%len), string_b)
!!$ end function StriEq_sc
logical function Str_Include_ac(carray, string_b) result(result)
!
! 文字型配列 *carray* が文字列 *string_b* と等しい要素を持つ場合に
! .true. を返します。
! 大文字・小文字は無視して比較されます。
!
character(len = *), intent(in):: carray(:)
character(len = *), intent(in):: string_b
integer :: array_size, i
continue
array_size = size(carray)
do i = 1, array_size
result = StriEq_cc(trim(carray(i)), string_b)
if (result) return
end do
end function Str_Include_ac
logical function str2bool(string) result(result)
!
! string で与えられる文字型変数を論理型にして返します。 string
! が空、 または 0、 0.0、 0.0D0、 0.0d0、 .false.、 .FALSE.、 f、
! F、 false、 FALSE の場合には .false. が返ります。
! それ以外の場合には .true. が返ります。
!
character(len = *), intent(in):: string
continue
select case(string)
case ("", "0", "0.0", "0.0D0", "0.0d0", ".false.", ".FALSE.", &
& "f", "F", "false", "FALSE")
result = .false.
case default
result = .true.
end select
end function str2bool
integer function atoi_scalar(string, default) result(result)
!
! string で与えられる文字型変数を、整数型変数にして返します。
! もしも string が数値に変換できない場合、default が返ります。
! default を指定しない場合は 0 が返ります。
!
character(len = *), intent(in):: string
integer, intent(in), optional:: default
integer:: ios
continue
read(unit=string, fmt="(i80)", iostat=ios) result
if (ios /= 0) then
if (present(default)) then
result = default
else
result = 0
endif
endif
end function atoi_scalar
!!$ integer function stoi_scalar(string) result(result) !:nodoc:
!!$ type(VSTRING), intent(in):: string
!!$ integer:: ios
!!$ character(len = 80):: buffer
!!$ continue
!!$ buffer = string
!!$ read(unit=buffer, fmt="(i80)", iostat=ios) result
!!$ if (ios /= 0) result = 0
!!$ end function stoi_scalar
real(DP) function atod_scalar(string) result(result)
!
! string で与えられる文字型変数を、倍精度実数型変数にして返します。
! もしも string が数値に変換できない場合、0.0 が返ります。
!
character(len = *), intent(in):: string
integer:: ios
character(len = 80):: buffer
integer:: ipoint, iexp
intrinsic scan
continue
buffer = string
! もし整定数をいれてしまった場合は小数点を附加
if (index(buffer, '.') == 0) then
iexp = scan(buffer, "eEdD")
if (iexp /= 0) then
buffer(iexp+1: len(buffer)) = buffer(iexp: len(buffer)-1)
ipoint = iexp
else
ipoint = len_trim(buffer) + 1
endif
buffer(ipoint: ipoint) = '.'
endif
read(unit=buffer, fmt="(g80.10)", iostat=ios) result
if (ios /= 0) result = 0.0
end function atod_scalar
!!$ real(DP) function stod_scalar(string) result(result) !:nodoc:
!!$ type(VSTRING), intent(in):: string
!!$ character(len = 80):: buffer
!!$ continue
!!$ buffer = string
!!$ result = atod_scalar(buffer)
!!$ end function stod_scalar
subroutine str2ip(int_ptr, string)
!
! string で与えられる文字型変数をカンマ「,」で区切り、
! 整数型配列ポインタ int_ptr(:) にして返します。 int_ptr(:)
! の配列サイズは string の内容に応じて自動的に決まります。
!
! ただし、int_ptr(:) は必ず空状態または不定状態で与えてください。
! 既に割り付けられている場合、メモリリークを起こします。
!
integer, pointer:: int_ptr(:) !(out)
character(len = *), intent(in):: string
integer:: i, j, idx, nvalues
continue
nvalues = 1
i = 1
do
idx = index(string(i: ), ',')
if (idx == 0) exit
i = i + idx - 1 + 1
nvalues = nvalues + 1
enddo
allocate(int_ptr(nvalues))
i = 1
j = 1
do
idx = index(string(i: ), ',')
if (idx == 0) then
int_ptr(j) = stoi(string(i: ))
exit
endif
int_ptr(j) = stod(string(i: i+idx-2))
i = i + idx - 1 + 1
j = j + 1
enddo
end subroutine str2ip
!!$ subroutine strv2ip(int_ptr, string) !:nodoc:
!!$ use dcstring_list !:nodoc:
!!$ integer, pointer:: int_ptr(:) !(out)
!!$ type(VSTRING), intent(in):: string
!!$ type(STRING_LIST):: vslist
!!$ integer:: nvalues, i
!!$ continue
!!$ call Split(vslist, string, ", ")
!!$ nvalues = len(vslist)
!!$ allocate(int_ptr(nvalues))
!!$ do, i = 1, nvalues
!!$ int_ptr(i) = stoi(shift(vslist))
!!$ enddo
!!$ call dispose(vslist)
!!$ end subroutine strv2ip
subroutine str2rp(real_ptr, string)
!
! string で与えられる文字型変数をカンマ「,」で区切り、
! 単精度実数型配列ポインタ real_ptr(:) にして返します。
! real_ptr(:) の配列サイズは string の内容に応じて自動的に決まります。
!
! ただし、real_ptr(:) は必ず空状態または不定状態で与えてください。
! 既に割り付けられている場合、メモリリークを起こします。
!
real, pointer:: real_ptr(:) !(out)
character(len = *), intent(in):: string
integer:: i, j, idx, nvalues
continue
nvalues = 1
i = 1
do
idx = index(string(i: ), ',')
if (idx == 0) exit
i = i + idx - 1 + 1
nvalues = nvalues + 1
enddo
allocate(real_ptr(nvalues))
i = 1
j = 1
do
idx = index(string(i: ), ',')
if (idx == 0) then
real_ptr(j) = stod(string(i: ))
exit
endif
real_ptr(j) = stod(string(i: i+idx-2))
i = i + idx - 1 + 1
j = j + 1
enddo
end subroutine str2rp
!!$ subroutine strv2rp(real_ptr, string) !:nodoc:
!!$ use dcstring_list !:nodoc:
!!$ real, pointer:: real_ptr(:) !(out)
!!$ type(VSTRING), intent(in):: string
!!$ type(STRING_LIST):: vslist
!!$ integer:: i, nvalues
!!$ continue
!!$ call Split(vslist, string, ", ")
!!$ nvalues = len(vslist)
!!$ allocate(real_ptr(nvalues))
!!$ do, i = 1, nvalues
!!$ real_ptr(i) = stod(shift(vslist))
!!$ enddo
!!$ call dispose(vslist)
!!$ end subroutine strv2rp
subroutine str2dp(real_ptr, string)
!
! string で与えられる文字型変数をカンマ「,」で区切り、
! 倍精度実数型配列ポインタ real_ptr(:) にして返します。
! real_ptr(:) の配列サイズは string の内容に応じて自動的に決まります。
!
! ただし、real_ptr(:) は必ず空状態または不定状態で与えてください。
! 既に割り付けられている場合、メモリリークを起こします。
!
real(DP), pointer:: real_ptr(:) !(out)
character(len = *), intent(in):: string
integer:: i, j, idx, nvalues
continue
nvalues = 1
i = 1
do
idx = index(string(i: ), ',')
if (idx == 0) exit
i = i + idx - 1 + 1
nvalues = nvalues + 1
enddo
allocate(real_ptr(nvalues))
i = 1
j = 1
do
idx = index(string(i: ), ',')
if (idx == 0) then
real_ptr(j) = stod(string(i: ))
exit
endif
real_ptr(j) = stod(string(i: i+idx-2))
i = i + idx - 1 + 1
j = j + 1
enddo
end subroutine str2dp
!!$ subroutine strv2dp(dble_ptr, string) !:nodoc:
!!$ use dcstring_list !:nodoc:
!!$ real(DP), pointer:: dble_ptr(:) !(out)
!!$ type(VSTRING), intent(in):: string
!!$ type(STRING_LIST):: vslist
!!$ integer:: i, nvalues
!!$ continue
!!$ call Split(vslist, string, ", ")
!!$ nvalues = len(vslist)
!!$ allocate(dble_ptr(nvalues))
!!$ do, i = 1, nvalues
!!$ dble_ptr(i) = stod(shift(vslist))
!!$ enddo
!!$ call dispose(vslist)
!!$ end subroutine strv2dp
!== 数値型、論理型から文字型への変換
!
! 総称名称 toChar として呼び出される関数群
!
character(TOKEN) function itoa_scalar(i) result(result)
!
! 整数型変数 i で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
integer, intent(in):: i
character(len = 32):: buffer
continue
write(unit=buffer, fmt="(i20)") i
result = adjustl(buffer)
end function itoa_scalar
character(STRING) function itoa_array(ibuf) result(result)
!
! 整数型配列変数 ibuf(:) で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
integer, intent(in):: ibuf(:)
integer:: i
continue
if (size(ibuf) <= 0) then
result = ""
return
endif
result = toChar(ibuf(1))
do, i = 2, size(ibuf)
result = trim(result) // ", " // trim(toChar(ibuf(i)))
enddo
end function itoa_array
character(TOKEN) function rtoa_scalar(x) result(result)
!
! 単精度実数型変数 x で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
real, intent(in):: x
character(len = 16):: buffer
integer:: ptr
continue
write(unit=buffer, fmt="(g16.8)") x
ptr = verify(buffer, " 0", back=.true.)
if (ptr > 0) buffer(ptr+1: ) = " "
result = adjustl(buffer)
end function rtoa_scalar
character(STRING) function rtoa_array(rbuf) result(result)
!
! 単精度実数型配列 rbuf(:)、で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
real, intent(in):: rbuf(:)
integer:: i
continue
if (size(rbuf) <= 0) then
result = ""
return
endif
result = toChar(rbuf(1))
do, i = 2, size(rbuf)
result = trim(result) // ", " // trim(toChar(rbuf(i)))
enddo
end function rtoa_array
character(TOKEN) function dtoa_scalar(d) result(result)
!
! 倍精度実数型変数 d で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
real(DP), intent(in):: d
character(len = 32):: buffer
integer:: ptr
continue
write(unit=buffer, fmt="(g32.24)") d
ptr = verify(buffer, " 0", back=.true.)
if (ptr > 0) buffer(ptr+1: ) = " "
result = adjustl(buffer)
end function dtoa_scalar
character(STRING) function dtoa_array(dbuf) result(result)
!
! 倍精度実数型配列 dbuf(:) で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
real(DP), intent(in):: dbuf(:)
integer:: i
continue
if (size(dbuf) <= 0) then
result = ""
return
endif
result = toChar(dbuf(1))
do, i = 2, size(dbuf)
result = trim(result) // ", " // trim(toChar(dbuf(i)))
enddo
end function dtoa_array
character(TOKEN) function ltoa_scalar(l) result(result)
!
! 論理型変数 l で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
logical, intent(in):: l
continue
if (l) then
result = ".true."
else
result = ".false."
end if
end function ltoa_scalar
character(STRING) function ltoa_array(lbuf) result(result)
!
! 論理型配列 lbuf(:) で与えられる数値を文字型変数にして返します。
! 配列が与えられる場合、各要素をカンマと空白「, 」
! で区切って返します。
!
logical, intent(in):: lbuf(:)
integer:: i
continue
if (size(lbuf) <= 0) then
result = ""
return
endif
result = toChar(lbuf(1))
do, i = 2, size(lbuf)
result = trim(result) // ", " // trim(toChar(lbuf(i)))
enddo
end function ltoa_array
!
!== 文字配列の連結
!
character(STRING) function JoinChar(carray, expr) result(result)
!
! 文字型配列 carray に与えた複数の文字列をカンマと空白
! 「, 」 で区切った1つの文字列にして返します。
! expr に文字列を与えると、その文字列を区切り文字として用います。
!
implicit none
character(*) , intent(in) :: carray(:)
character(*) , intent(in), optional :: expr
character(2) ,parameter :: default = ', '
character(STRING) :: delimiter
integer :: dellen, i
continue
if ( present(expr) ) then
delimiter = expr
dellen = len(expr)
else
delimiter = default
dellen = len(default)
endif
if (size(carray) <= 0) then
result = ""
return
endif
result = trim(carray(1))
do, i = 2, size(carray)
result = trim(result) // delimiter(1:dellen) // trim(carray(i))
enddo
end function JoinChar
subroutine concat_tail(carray, str, result)
!
! 文字型配列 *carray* の各成分の末尾に *str* を追加して
! *result* に返します。*carray* の各成分の末尾の空白は無視されます。
!
! result(:) の配列サイズは carray のサイズに応じて自動的に決まります。
! ただし、result(:) は必ず空状態または不定状態で与えてください。
! 既に割り付けられている場合、メモリリークを起こします。
!
implicit none
character(*), intent(in) :: carray(:)
character(*), intent(in) :: str
character(STRING), pointer:: result(:) ! (out)
integer :: i, size_carray
continue
size_carray = size(carray)
allocate(result(size_carray))
do i = 1, size_carray
result(i) = trim(carray(i)) // str
end do
end subroutine concat_tail
function Str_to_Array1(c1) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1
character(STRING) :: result(1)
continue
result(1) = c1
end function Str_to_Array1
function Str_to_Array2(c1, c2) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2
character(STRING) :: result(2)
continue
result(1) = c1
result(2) = c2
end function Str_to_Array2
function Str_to_Array3(c1, c2, c3) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3
character(STRING) :: result(3)
continue
result(1) = c1
result(2) = c2
result(3) = c3
end function Str_to_Array3
function Str_to_Array4(c1, c2, c3, c4) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4
character(STRING) :: result(4)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
end function Str_to_Array4
function Str_to_Array5(c1, c2, c3, c4, c5) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5
character(STRING) :: result(5)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
end function Str_to_Array5
function Str_to_Array6(c1, c2, c3, c4, c5, c6) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5, c6
character(STRING) :: result(6)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
result(6) = c6
end function Str_to_Array6
function Str_to_Array7(c1, c2, c3, c4, c5, c6, c7) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5, c6, c7
character(STRING) :: result(7)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
result(6) = c6
result(7) = c7
end function Str_to_Array7
function Str_to_Array8(c1, c2, c3, c4, c5, c6, c7, c8) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5, c6, c7, c8
character(STRING) :: result(8)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
result(6) = c6
result(7) = c7
result(8) = c8
end function Str_to_Array8
function Str_to_Array9(c1, c2, c3, c4, c5, c6, c7, c8, c9) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5, c6, c7, c8, c9
character(STRING) :: result(9)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
result(6) = c6
result(7) = c7
result(8) = c8
result(9) = c9
end function Str_to_Array9
function Str_to_Array10(c1, c2, c3, c4, c5, c6, c7, c8, c9, c10) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5, c6, c7, c8, c9, c10
character(STRING) :: result(10)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
result(6) = c6
result(7) = c7
result(8) = c8
result(9) = c9
result(10) = c10
end function Str_to_Array10
function Str_to_Array11(c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11
character(STRING) :: result(11)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
result(6) = c6
result(7) = c7
result(8) = c8
result(9) = c9
result(10) = c10
result(11) = c11
end function Str_to_Array11
function Str_to_Array12(c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11, c12) result(result)
!
! 異なる長さの複数の文字型変数を 1 つの文字型配列に変換します。
!
! 1 から 12 個までの引数を与えることが可能です。
!
character(*), intent(in) :: c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11, c12
character(STRING) :: result(12)
continue
result(1) = c1
result(2) = c2
result(3) = c3
result(4) = c4
result(5) = c5
result(6) = c6
result(7) = c7
result(8) = c8
result(9) = c9
result(10) = c10
result(11) = c11
result(12) = c12
end function Str_to_Array12
!
!== 文字列の分解
subroutine Split_CC(str, carray, sep, limit)
!
! *str* で与えられた文字列を 文字列 *sep* で分解し,
! ポインタ配列 *carray* に返します.
! *carray* は必ず空状態にして与えてください. 割り付け状態の
! 場合にはエラーを返します.
!
! *limit* に正の数を与えた場合, 最大 *limit* 個のフィールドに分割
! します. 負の数や 0 の場合は省略した場合と同じになります. *str*
! の末尾の空白は除去されます. *sep* に空文字を代入する場合, 空白
! 文字で分割されます.
!
use dc_types, only: STRING
implicit none
character(*), intent(in):: str
character(*), pointer:: carray(:) !(out)
character(*), intent(in):: sep
integer, intent(in), optional:: limit
integer :: num, cur, i, limitnum
character(STRING) :: substr
logical :: end_flag
continue
if (present(limit)) then
if (limit > 0) then
limitnum = limit
else
limitnum = 0
end if
else
limitnum = 0
end if
if (len(trim(sep)) == 0) then
num = 1
substr = str
! 重複して無駄だが carray を allocate するため, 何分割するか
! 調べ, num に格納する.
do
cur = index(trim(substr), ' ')
if (cur == 0) exit
num = num + 1
substr = adjustl(substr(cur + len(sep) :len(substr)))
end do
if (limitnum /= 0 .and. num > limitnum) num = limitnum
allocate(carray(num))
substr = str
end_flag = .false.
do i = 1, num
cur = index(trim(substr), ' ')
if (cur == 0 .or. i == num) end_flag = .true.
if (end_flag) then
carray(i) = substr
exit
else
carray(i) = substr(1:cur - 1)
end if
substr = adjustl(substr(cur + len(sep) :len(substr)))
end do
else
num = 1
substr = str
! 重複して無駄だが carray を allocate するため, 何分割するか
! 調べ, num に格納する.
do
cur = index(substr, trim(sep))
if (cur == 0) exit
num = num + 1
substr = substr(cur + len(sep) :len(substr))
end do
if (limitnum /= 0 .and. num > limitnum) num = limitnum
allocate(carray(num))
substr = str
end_flag = .false.
do i = 1, num
cur = index(substr, trim(sep))
if (cur == 0 .or. i == num) end_flag = .true.
if (end_flag) then
carray(i) = substr
exit
else
carray(i) = substr(1:cur - 1)
end if
substr = substr(cur + len(sep) :len(substr))
end do
end if
return
end subroutine Split_CC
!== 文字列の解析
!
integer function Index_Ofs(string, start, substr) result(result)
!
! 文字列 string の start 文字目以降の文字列の中に substr
! の文字列が含まれている時、その開始文字位置を返します。
! 含まれない場合は 0 を返します。
! 返される開始文字位置は文字列 string の先頭から数えます。
!
character(len = *), intent(in):: string
integer, intent(in):: start
character(len = *), intent(in):: substr
intrinsic index
if (start < 1) then
result = 0
return
endif
result = index(string(start: ), substr)
if (result == 0) return
result = start + result - 1
end function Index_Ofs
function Replace(string, from, to) result(result)
!
! 文字列 string に文字列 from が含まれる場合、その部分を文字列 to
! に置換して返します。文字列 from が含まれない場合は string
! をそのまま返します。 from が複数含まれる場合、先頭の from
! のみが置換されます。
!
use dc_types, only: STRLEN => STRING
implicit none
character(len = STRLEN):: result
character(len = *), intent(in):: string, from, to
integer:: i, isa, isb, iea, ieb
continue
result = string
i = index(result, from)
if (i == 0) return
isa = i + len(from)
isb = i + len(to)
if (len(to) < len(from)) then
iea = len(result)
ieb = len(result) + len(to) - len(from)
else
iea = len(result) + len(from) - len(to)
ieb = len(result)
endif
if (len(to) /= len(from)) result(isb:ieb) = result(isa:iea)
result(i:i+len(to)-1) = to
end function Replace
!== 大文字・小文字を無視した処理
!
subroutine cupper(ch)
!
! 文字列 ch に英字が含まれる場合、その英字を大文字に変換して ch
! に返します。 英字でない文字や既に大文字になっている文字は
! そのまま返します。
!
character(len = *), intent(inout):: ch
integer:: i, lch, idx
continue
lch = len(ch)
do, i = 1, lch
idx = ichar(ch(i:i))
if (97 <= idx .and. idx <= 122) then
ch(i:i)=char(idx - 32)
end if
end do
end subroutine cupper
subroutine clower(ch)
!
! 文字列 ch に英字が含まれる場合、その英字を小文字に変換して ch
! に返します。 英字でない文字や既に小文字になっている文字は
! そのまま返します。
!
character(len = *), intent(inout):: ch
integer:: i, lch, idx
continue
lch = len(ch)
do, i = 1, lch
idx = ichar(ch(i:i))
if (65 <= idx .and. idx <= 90) then
ch(i:i)=char(idx + 32)
end if
end do
end subroutine clower
character(STRING) function UChar(ch) result(result)
!
! 文字列 ch に英字が含まれる場合、その英字を大文字に変換して返します。
! 英字でない文字や既に大文字になっている文字はそのまま返します。
!
character(len = *), intent(in):: ch
continue
result = ch
call toUpper(result)
end function UChar
character(STRING) function LChar(ch) result(result)
!
! 文字列 ch に英字が含まれる場合、その英字を小文字に変換して返します。
! 英字でない文字や既に小文字になっている文字はそのまま返します。
!
character(len = *), intent(in):: ch
continue
result = ch
call toLower(result)
end function LChar
end module
!--
! vi:set readonly sw=4 ts=8:
!
!Local Variables:
!mode: f90
!buffer-read-only: t
!End:
!
!++