!== Command line arguments parser
!
! Authors:: Yasuhiro MORIKAWA
! Version:: $Id: dc_args.f90,v 1.9 2006/12/26 14:35:21 morikawa Exp $
! Tag Name:: $Name: gt4f90io-20070417 $
! Copyright:: Copyright (C) GFD Dennou Club, 2005. All rights reserved.
! License:: See COPYRIGHT[link:../../COPYRIGHT]
!
module dc_args
!
!== Overview
!
! コマンドライン引数の解析を行います.
!
! 加えて, ヘルプメッセージの表示に関して便利なサブルーチンも
! 用意しています.
!
!== List
!
! Open :: 構造型 ARGS 変数の初期化
! Close :: 構造型 ARGS 変数の終了処理
! Get :: コマンドライン引数の取得
! Number :: コマンドライン引数の数を返す
! Option :: コマンドライン引数オプションを取得するための設定
! Debug :: デバッグオプションの自動設定
! Help :: ヘルプオプションの自動設定
! HelpMsg :: ヘルプメッセージの設定
! Strict :: 無効なオプションが指定された時に警告を表示するよう設定
! Put_Line :: 構造型 ARGS 変数の内容を印字
!
!
!== Usage
!
! 構造型 ARGS の変数を定義し, Open, Get を利用することで
! コマンドライン引数を取得することができます.
!
! use dc_types
! use dc_string, only: StoA
! use dc_args
! implicit none
! type(ARGS) :: arg
! character(TOKEN), pointer :: argv(:) => null()
! integer :: i
!
! call Open(arg)
! call Debug(arg) ; call Help(arg) ; call Strict(arg)
! call Get(arg, argv)
! do i = 1, size(argv)
! write(*,*) argv(i)
! end do
! deallocate(argv)
! call Close(arg)
!
! 引数にオプションを指定したい場合には, Option サブルーチンを
! 利用してください. オプションの書式に関しては Option の
! 「オプションの書式」を参照してください.
!
! use dc_types
! use dc_string, only: StoA
! use dc_args
! implicit none
! type(ARGS) :: arg
! logical :: OPT_size
! logical :: OPT_namelist
! character(STRING) :: VAL_namelist
!
! call Open(arg)
! call Option(arg, StoA('s', 'size'), &
! & OPT_size, help="Return number of arguments")
! call Option(arg, StoA('N', 'namelist'), &
! & OPT_namelist, VAL_namelist, help="Namelist filename")
! call Debug(arg); call Help(arg) ; call Strict(arg)
!
! if (OPT_size) then
! write(*,*) 'number of arguments :: ', Number(arg)
! end if
! if (OPT_namelist) then
! write(*,*) '--namelist=', trim(VAL_namelist)
! else
! write(*,*) '--namelist is not found'
! end if
! call Close(arg)
!
! コマンドライン引数に '-h', '-H', '--help' のいづれかのオプションを
! 指定することで, オプションの一覧が標準出力に表示されます.
!
! ヘルプメッセージの内容を充実させたい場合には HelpMsg を
! 参照してください.
!
!
!== Note
!
!=== dc_args モジュールを作成した理由について
!
! Fortran コンパイラのほとんどには IARGC, GETARG といった
! コマンドライン引数取得のための副プログラムが用意されている.
! これらの副プログラムの利用によって, コマンドラインの引数を
! 単に取得することは簡単である.
!
! しかしこの IARGC, GETARG の使用に際し, 2 つほど面倒な点がある.
!
! 1 つはコンパイラ依存による IARGC, GETARG の仕様の違いである.
! これらの副プログラムは Fortran 規格に含まれないサービスルーチン
! であるため, たいていのコンパイラにはこの副プログラムは
! 存在するものの, 仕様が微妙に異なる場合がある. (大抵のコンパイラは
! GETARG の第一引数を 1 にすると一つ目の引数を取得するが,
! 古い HITACHI のコンパイラは第一引数を 2 にしないと一つ目の
! 引数を取得できない, など). そこで gt4f90io ライブラリでは
! これらのコンパイラ依存性を吸収する設計を行っている.
! dc_args モジュールを使用する際には, これらのコンパイラ依存は
! 気にしなくてよい. (なお, コンパイラ依存性を実際に
! 吸収しているのは sysdep モジュールである).
!
! 2 つ目は, コマンドライン引数におけるオプション引数
! (-h や --version など) の取り扱いの不便さである.
! IARGC や GETARG は単に引数を取得するための副プログラムであり,
! Perl や Ruby などのインタプリタ言語のように,
! コマンドライン引数にオプション引数を処理するための
! ライブラリ (Getopt や OptionParser など) が用意されていない.
! dc_args モジュールは, Fortran プログラムでもオプション引数を
! 手軽に扱えるよう, オプション引数処理の
! ためのコーディングをできるだけ簡素にするべく整備したプログラムである.
!
! 設計思想は, {オブジェクト指向スクリプト言語 Ruby}[http://www.ruby-lang.org/]
! の OptionParser[http://www.ruby-lang.org/ja/man/index.cgi?cmd=view;name=OptionParser]
! を真似ており, OptionParser クラスのオブジェクトを
! 構造型 ARGS に, new (initialize) メソッドを Open サブルーチンに,
! on メソッドを Option サブルーチンに, parse メソッドを Get
! サブルーチンに見立てている. 言語仕様の違いにより実装や仕様は
! それなりに異なるが, 構造型 ARGS の変数をオブジェクトに見立て,
! この変数に対してサブルーチンを作用させることによって
! オブジェクトへの操作やオブジェクトからの引数情報の取得を行うという点では
! OptionParser と同様である.
!
! おまけ的機能であるが, dc_trace モジュールとの連携も図られており,
! Debug サブルーチンを使用することにより (使用法は上記参照), 再コン
! パイルすることなく, プログラムの実行の際に "-D" オプションをつける
! ことでデバッグメッセージを表示するモードに変更することもできる.
!
use dc_types, only : STRING
use dc_hash, only: HASH
implicit none
private
public:: ARGS
public:: Open, Close, Option, Put_Line, Debug, Help, HelpMsg, Strict, Get
public:: Number
type ARGS
!
! コマンドライン引数解析用の構造体です.
! 初期化には Open を, 終了処理には Close を用います.
! コマンドライン引数に与えられる引数や, プログラム内で
! Option, HelpMsg サブルーチンによって与えられた情報を
! 格納します.
!
! 詳しい使い方は dc_args の Usage を参照ください.
!
private
type(OPT_ENTRY), pointer :: opt_table(:) => null()
! Option サブルーチンで指定される
! オプションのリスト
logical :: initialized = .false.
type(CMD_OPTS_INTERNAL), pointer :: cmd_opts_list(:) => null()
! コマンドライン引数のうち, オプションと
! して識別されるものののリスト.
type(HASH) :: helpmsg
end type ARGS
type OPT_ENTRY
character(STRING), pointer:: options(:) => null()
! オプション名リスト
character(STRING) :: help_message
! ヘルプメッセージ
logical :: optvalue_flag
! オプションの値の有無
end type OPT_ENTRY
type CMD_OPTS_INTERNAL
character(STRING) :: name ! オプション名
character(STRING) :: value ! 値
logical:: flag_called = .false.
! このオプション名が Option で呼ばれたもの
! かどうかを判別するフラグ
end type CMD_OPTS_INTERNAL
interface Open
module procedure DCArgsOpen
end interface
interface Close
module procedure DCArgsClose
end interface
interface Option
module procedure DCArgsOption
end interface
interface Put_Line
module procedure DCArgsPutLine
end interface
interface Debug
module procedure DCArgsDebug
end interface
interface Help
module procedure DCArgsHelp
end interface
interface HelpMsg
module procedure DCArgsHelpMsg
end interface
interface Strict
module procedure DCArgsStrict
end interface
interface Get
module procedure DCArgsGet
end interface
interface Number
module procedure DCArgsNumber
end interface
!=== BuildArgTable で設定される変数
character(STRING), allocatable, save:: argstr_table(:)
! 全引数の内容. (オプションかどうかなど
! の判別は行っていない). BuildArgTable
! で設定される.
integer, save:: argind_count = -1
! 全引数の数. BuildArgTable で
! 設定される.
!=== SortArgTable で設定される変数
type(CMD_OPTS_INTERNAL), allocatable, save :: cmd_opts_list(:)
! コマンドライン引数のうち, オプションと
! して識別されるものののリス
! ト. SortArgTable で設定される.
character(STRING), allocatable, save:: cmd_argv_list(:)
! コマンドライン引数のうち, オプションで
! はない引数のリスト. SortArgTable で設
! 定される.
contains
subroutine DCArgsOpen(arg)
!
!=== ARGS の初期化用サブルーチン
!
! ARGS 型の変数を利用する際にはまずこのサブルーチンによって
! 初期化を行ってください.
!
! このサブルーチンは, より下層のサブルーチン内で IARGC や GETARG
! を用いて得られたコマンドライン引数の情報を引数 *arg*
! へと格納します.
!
use dc_message, only: MessageNotify
use dc_types, only: STRING
implicit none
type(ARGS), intent(out) :: arg
integer:: cmd_opts_max
character(len = *), parameter :: subname = 'DCArgsOpen'
continue
if (arg % initialized) then
call MessageNotify('W', subname, 'This argument (type ARGS) is already opend.')
return
end if
call BuildArgTable
call SortArgTable
cmd_opts_max = size(cmd_opts_list)
allocate(arg % cmd_opts_list(cmd_opts_max))
arg % cmd_opts_list = cmd_opts_list
allocate(arg % opt_table(0))
arg % initialized = .true.
end subroutine DCArgsOpen
subroutine DCArgsClose(arg)
!
!=== ARGS の終了サブルーチン
!
! ARGS 型の変数をクローズします.
!
use dc_hash, only: Delete
implicit none
type(ARGS), intent(inout) :: arg
integer :: i
continue
if (arg % initialized) then
do i = 1, size(arg % opt_table)
deallocate(arg % opt_table(i) % options)
end do
deallocate(arg % opt_table)
deallocate(arg % cmd_opts_list)
call Delete(arg % helpmsg)
end if
end subroutine DCArgsClose
subroutine DCArgsOption(arg, options, flag, value, help)
!
!=== オプション情報の登録と取得
!
! コマンドライン引数のうち, *options* に与えるオプションに関する情
! 報を *flag* と *value* に取得します. *options* がコマンドライン
! 引数に与えられていれば *flag* に .true. が, そうでない場合は
! .false. が返ります. オプションに値が指定される場合は *value* に
! その値が返ります. オプション自体が与えられていない場合には
! *value* には空文字が返ります.
!
! *help* には *options* に関するヘルプメッセージを *arg* に
! 登録します. サブルーチン Help (または DCArgsHelp) を
! 用いた際に, このメッセージが出力されます.
! *value* を与えているかどうかでこのメッセージは変化します.
!
!==== オプションの書式
!
! コマンドライン引数のうち, オプションと判定されるのは以下の場合です.
!
! * 1 文字目が '-' の場合. この場合は短いオプションとなり, '-'
! の次の一文字のみがオプションとして有効になります.
!
! * 1-2文字目が '--' (ハイフン 2 文字) の場合.
! この場合は長いオプションとなり,
! '--' 以降の文字列がオプションとして有効になります.
!
! オプションの値は, "=" よりも後ろの文字列になります.
!
! 例
!
! コマンドライン引数 :: オプション名, 値
! -h :: -h, 無し
! --help :: --help, 無し
! -D=6 :: -D, 6
! -debug= :: -d, 無し
! --include=/usr :: --include, /usr
!
use dc_message, only: MessageNotify
implicit none
type(ARGS), intent(inout) :: arg
character(len = *), intent(in) :: options(:)
logical, intent(out) :: flag
character(len = *), intent(out), optional :: value
character(len = *), intent(in), optional :: help
integer :: i, j, options_size, table_size
type(OPT_ENTRY), allocatable :: local_tables(:)
character(len = STRING) :: opt_name, opt_value, opt_full
character(len = *), parameter :: subname = 'DCArgsOption'
continue
flag = .false.
if (present(value)) value = ''
if (.not. arg % initialized) then
call MessageNotify('W', subname, 'Call Open before Option in dc_args.')
call DCArgsOpen(arg)
end if
options_size = size(options)
if (options_size < 1) then
return
end if
!-----------------------------------
!== 構造体 ARGS へのヘルプメッセージ用の情報登録
!=== まずはテーブル arg % opt_table を一つ広げる.
!-----------------------------------
table_size = size(arg % opt_table)
allocate(local_tables(table_size))
local_tables(1:table_size) = arg % opt_table(1:table_size)
deallocate(arg % opt_table)
allocate(arg % opt_table(table_size + 1))
arg % opt_table(1:table_size) = local_tables(1:table_size)
deallocate(local_tables)
!----- 値の代入 -----
allocate(arg % opt_table(table_size + 1) % options(options_size))
arg % opt_table(table_size + 1) % options = options
arg % opt_table(table_size + 1) % help_message = ''
if (present(help)) then
arg % opt_table(table_size + 1) % help_message = help
end if
arg % opt_table(table_size + 1) % optvalue_flag = present(value)
!----- options の正規化 -----
do i = 1, options_size
opt_full = arg % opt_table(table_size + 1) % options(i)
if (DCOptionFormC(opt_full, opt_name, opt_value)) then
arg % opt_table(table_size + 1) % options(i) = opt_name
else
if (len(trim(adjustl(opt_full))) < 2) then
arg % opt_table(table_size + 1) % options(i) = &
& '-' // trim(adjustl(opt_full))
else
arg % opt_table(table_size + 1) % options(i) = &
& '--' // trim(adjustl(opt_full))
end if
end if
end do
! arg % cmd_opts_list 内の探査と flag, value への代入
! 呼ばれたものに関しては arg % cmd_opts_list % flag_called を
! .true. に
do i = 1, options_size
do j = 1, size(arg % cmd_opts_list)
if (trim(arg % opt_table(table_size + 1) % options(i)) &
& == trim(arg % cmd_opts_list(j) % name)) then
flag = .true.
if (present(value)) then
value = arg % cmd_opts_list(j) % value
end if
arg % cmd_opts_list(j) % flag_called = .true.
end if
end do
end do
end subroutine DCArgsOption
subroutine DCArgsDebug(arg)
!
!=== デバッグオプション自動設定サブルーチン
!
! -D もしくは --debug が指定された際, 自動的に
! dc_trace#SetDebug を呼び出すよう *arg* を設定します.
!
use dc_types, only: STRING
use dc_string, only: StoA, StoI
use dc_trace, only: SetDebug
use dc_message, only: MessageNotify
implicit none
type(ARGS), intent(inout) :: arg
logical :: OPT_debug
character(STRING) :: VAL_debug
character(len = *), parameter :: subname = 'DCArgsDebug'
continue
if (.not. arg % initialized) then
call MessageNotify('W', subname, 'Call Open before Debug in dc_args.')
call DCArgsOpen(arg)
end if
call Option(arg, StoA('-D', '--debug'), OPT_debug, VAL_debug, &
& help="call dc_trace#SetDebug (display a lot of messages for debug). " // &
& "VAL is unit number (default is standard output)")
if (OPT_debug) then
if (trim(VAL_debug) == '') then
call SetDebug
else
call SetDebug(StoI(VAL_debug))
end if
end if
return
end subroutine DCArgsDebug
subroutine DCArgsHelp(arg, force)
!
!=== ヘルプオプション自動設定サブルーチン
!
! -h, -H, --help のいづれかが指定された際, 自動的に *arg* 内に設定された
! 情報をヘルプメッセージとして表示した後, プログラムを終了させます.
! 原則的に, このサブルーチンよりも前に Option, Debug のサブルーチンを
! 呼んで下さい.
!
! *force* に .true. が指定される場合, -H, --help オプションが与え
! られない場合でもヘルプメッセージを表示した後, プログラムを終了さ
! せます.
!
! ヘルプメッセージに表示される情報は, Option, HelpMsg サブルーチン
! によって付加することが可能です.
!
use dc_types, only: STRING, STDOUT
use dc_string, only: StoA, StoI, Printf, Concat, JoinChar, UChar, LChar
use dc_present, only: present_and_true
use dc_message, only: MessageNotify
use dc_hash, only: Get, Delete, Rewind, Next
implicit none
type(ARGS), intent(inout) :: arg
logical, intent(in), optional :: force
logical :: OPT_help, found, end
character(STRING) :: VAL_help, options_msg, help_msg, category
character(STRING), pointer :: localopts(:) => null()
integer :: unit, i
character(len = *), parameter :: subname = 'DCArgsHelp'
continue
if (.not. arg % initialized) then
call MessageNotify('W', subname, 'Call Open before Help in dc_args.')
call DCArgsOpen(arg)
end if
call Option(arg, StoA('-h', '-H', '--help'), OPT_help, VAL_help, &
& help="display this help and exit. " // &
& "VAL is unit number (default is standard output)")
if (.not. OPT_help .and. .not. present_and_true(force)) then
return
end if
if (trim(VAL_help) == '') then
unit = STDOUT
else
unit = StoI(VAL_help)
end if
call Printf(unit, '')
call Get(arg % helpmsg, 'TITLE', help_msg, found)
if (found) then
call Printf(unit, '%c', c1=trim(help_msg))
call Printf(unit, '')
call Delete(arg % helpmsg, 'TITLE')
end if
call Get(arg % helpmsg, 'OVERVIEW', help_msg, found)
if (found) then
call Printf(unit, 'Overview::')
call PrintAutoLinefeed(unit, help_msg, indent=' ')
call Printf(unit, '')
call Delete(arg % helpmsg, 'OVERVIEW')
end if
call Get(arg % helpmsg, 'USAGE', help_msg, found)
if (found) then
call Printf(unit, 'Usage::')
call PrintAutoLinefeed(unit, help_msg, indent=' ')
call Printf(unit, '')
call Delete(arg % helpmsg, 'USAGE')
end if
call Printf(unit, 'Options::')
do i = 1, size(arg % opt_table)
options_msg = ' '
if (arg % opt_table(i) % optvalue_flag) then
call Concat(arg % opt_table(i) % options, '=VAL', localopts)
else
allocate(localopts(size(arg % opt_table(i) % options)))
localopts = arg % opt_table(i) % options
end if
options_msg = trim(options_msg) // trim(JoinChar(localopts))
deallocate(localopts)
call Printf(unit, ' %c', c1=trim(options_msg))
call PrintAutoLinefeed(unit, &
& arg % opt_table(i) % help_message, indent=' ')
call Printf(unit, '')
end do
call Rewind(arg % helpmsg)
do
call Next(arg % helpmsg, category, help_msg, end)
if (end) exit
call Printf(unit, '%c%c::', &
& c1=trim(UChar(category(1:1))), c2=trim(LChar(category(2:))))
call PrintAutoLinefeed(unit, help_msg, indent=' ')
call Printf(unit, '')
enddo
call DCArgsClose(arg)
stop
end subroutine DCArgsHelp
subroutine DCArgsHelpMsg(arg, category, msg)
!
!=== ヘルプメッセージ追加サブルーチン
!
! サブルーチン Help を使用した際に出力されるメッセージを
! 付加します. *category* に +Title+, +Overview+, +Usage+ が
! 指定されたものは +Options+ よりも上部に,
! それ以外のものは下部に表示されます.
! *msg* にはメッセージを与えてください.
!
!==== 例
!
! use dc_types
! use dc_string, only: StoA
! use dc_args
! implicit none
! type(ARGS) :: arg
! logical :: OPT_namelist
! character(STRING) :: VAL_namelist
! character(TOKEN), pointer :: argv(:) => null()
! integer :: i
!
! call Open(arg)
! call HelpMsg(arg, 'Title', 'dcargs $Revision: 1.9 $ :: Test program of dc_args')
! call HelpMsg(arg, 'Usage', 'dcargs [Options] arg1, arg2, ...')
! call Option(arg, StoA('-N', '--namelist'), &
! & OPT_namelist, VAL_namelist, help="Namelist filename")
! call HelpMsg(arg, 'DESCRIPTION', &
! & '(1) Define type "HASH". ' // &
! & '(2) Open the variable. ' // &
! & '(3) set HelpMsg. ' // &
! & '(4) set Options. ' // &
! & '(5) call Debug. ' // &
! & '(6) call Help. ' // &
! & '(7) call Strict.')
! call HelpMsg(arg, 'Copyright', &
! & 'Copyright (C) GFD Dennou Club, 2006. All rights reserved.')
! call Debug(arg)
! call Help(arg)
! call Strict(arg)
! call Get(arg, argv)
! write(*,*) '--namelist=', trim(VAL_namelist)
! do i = 1, size(argv)
! write(*,*) argv(i)
! end do
! deallocate(argv)
! call Close(arg)
!
! コマンドライン引数に '-h', '-H', '--help' のいづれかのオプション
! を指定することで, HelpMsg で与えたメッセージと, オプションの一覧
! が標準出力に表示されます.
!
use dc_hash, only: Put
use dc_string, only: UChar
use dc_message, only: MessageNotify
implicit none
type(ARGS), intent(inout) :: arg
character(*), intent(in) :: category
character(*), intent(in) :: msg
character(len = *), parameter :: subname = 'DCArgsHelpMsg'
continue
if (.not. arg % initialized) then
call MessageNotify('W', subname, 'Call Open before Help in dc_args.')
call DCArgsOpen(arg)
end if
call Put(arg % helpmsg, key=UChar(category), value=msg)
end subroutine DCArgsHelpMsg
subroutine DCArgsStrict(arg, severe)
!
!=== オプションチェックサブルーチン
!
! コマンドライン引数のオプションとして指定されたものの内,
! Option サブルーチンで設定されていないものが存在する
! 場合には警告を返します. *severe* に .true. を指定すると
! エラーを返して終了します.
! このサブルーチンを呼ぶ前に, Option, Debug, Help サブルーチンを
! 呼んでください.
!
! 構造体 ARGS の変数に対してこのサブルーチンを適用しておく
! ことで, コマンドライン引数として与えたオプションが正しく
! プログラムが認識しているかどうかをチェックすることができます.
!
!
use dc_types, only: STRING
use dc_present, only: present_and_true
use dc_message, only: MessageNotify
implicit none
type(ARGS), intent(inout) :: arg
logical, intent(in), optional :: severe
character(STRING) :: err_mess
integer :: i
character(len = *), parameter :: subname = 'DCArgsStrict'
continue
if (.not. arg % initialized) then
call MessageNotify('W', subname, 'Call Open before Help in dc_args.')
call DCArgsOpen(arg)
end if
do i = 1, size(arg % cmd_opts_list)
err_mess = trim(arg % cmd_opts_list(i) % name) // ' is invalid option.'
if (.not. arg % cmd_opts_list(i) % flag_called) then
if (present_and_true(severe)) then
call MessageNotify('E', subname, err_mess)
else
call MessageNotify('W', subname, err_mess)
end if
end if
end do
end subroutine DCArgsStrict
subroutine DCArgsGet(arg, argv)
!
!=== 引数取得サブルーチン
!
! コマンドライン引数のうち, オプションではないものを
! *argv* に返します.
!
! *argv* は文字型配列のポインタです.
! 引数として与える場合には必ず空状態して与えてください.
!
use dc_types, only: STRING
use dc_string, only: StoA, StoI, Printf, Concat, JoinChar
use dc_present, only: present_and_true
use dc_message, only: MessageNotify
implicit none
type(ARGS), intent(inout) :: arg
character(*), pointer :: argv(:) !(out)
integer :: i, cmd_argv_max
character(len = *), parameter :: subname = 'DCArgsGet'
continue
if (.not. arg % initialized) then
call MessageNotify('W', subname, 'Call Open before Help in dc_args.')
call DCArgsOpen(arg)
end if
cmd_argv_max = size(cmd_argv_list)
allocate(argv(cmd_argv_max))
do i = 1, cmd_argv_max
argv(i) = cmd_argv_list(i)
end do
end subroutine DCArgsGet
function DCArgsNumber(arg) result(result)
!
!=== コマンドライン引数の数を返す
!
! コマンドライン引数として与えられた引数の数を返します.
!
use dc_message, only: MessageNotify
implicit none
type(ARGS), intent(inout) :: arg
integer :: result
character(len = *), parameter :: subname = 'DCArgsGet'
continue
if (.not. arg % initialized) then
call MessageNotify('W', subname, 'Call Open before Help in dc_args.')
call DCArgsOpen(arg)
end if
result = size(cmd_argv_list)
end function DCArgsNumber
subroutine DCArgsPutLine(arg)
!
!=== 情報の印字
!
! *arg* に関する情報を標準出力に表示します.
!
use dc_types, only: STDOUT
use dc_string, only: Printf, JoinChar
implicit none
type(ARGS), intent(in) :: arg
integer :: i
continue
if (.not. arg % initialized) then
call Printf(STDOUT, '#', l=(/arg % initialized/))
return
end if
call Printf(STDOUT, '#')
end do
call Printf(STDOUT, ' ,')
call Printf(STDOUT, ' @cmd_opts_list(:)=')
do i = 1, size(arg % cmd_opts_list)
call Printf(STDOUT, ' #')
end do
call Printf(STDOUT, ' ,')
call Printf(STDOUT, ' @cmd_argv_list(:)=%c', &
& c1=trim(JoinChar(cmd_argv_list)))
call Printf(STDOUT, '>')
end subroutine DCArgsPutLine
subroutine PrintAutoLinefeed(unit, fmt, length, indent)
!
!== 自動改行出力サブルーチン
!
! このモジュール内部で用いるためのサブルーチンです.
!
! *fmt* に与えられた文章を文字数 *length* (指定されない場合 70)
! 以内に改行し, 出力します. 出力の際, *indent* が指定されていると
! その文字列を行頭に挿入して出力を行います.
! 出力先はデフォルトは標準出力となります. *unit* に出力装置番号
! を設定することで出力先を変更できます.
!
use dc_types, only: STRING, STDOUT
use dc_string, only: Split
implicit none
character(*), intent(in) :: fmt
integer, intent(in), optional :: length ! 一行の長さ
character(*), intent(in), optional :: indent ! 字下げ文字列
integer, intent(in), optional :: unit ! 出力装置
character(STRING), pointer :: carray_tmp(:) => null()
character(STRING) :: store_str
integer, parameter :: default_len = 70
integer :: i, split_len, indent_len, unit_num
logical :: new_line_flag
continue
if (present(unit)) then
unit_num = unit
else
unit_num = STDOUT
end if
if (present(indent)) then
indent_len = len(indent)
else
indent_len = 0
end if
if (present(length)) then
split_len = length - indent_len
else
split_len = default_len - indent_len
end if
nullify(carray_tmp)
call Split(fmt, carray_tmp, '')
store_str = ''
new_line_flag = .true.
i = 1
do
if (i > size(carray_tmp)) then
write(unit_num, '(A)') trim(store_str)
exit
end if
if (len(trim(store_str)) + len(trim(carray_tmp(i))) > split_len) then
if (new_line_flag) then
write(unit_num, '(A)') trim(carray_tmp(i))
i = i + 1
else
write(unit_num, '(A)') trim(store_str)
store_str = ''
new_line_flag = .true.
end if
cycle
end if
if (new_line_flag .and. present(indent)) then
store_str = indent // trim(carray_tmp(i))
else
store_str = trim(store_str) // ' ' // trim(carray_tmp(i))
end if
new_line_flag = .false.
i = i + 1
end do
end subroutine PrintAutoLinefeed
subroutine SortArgTable
!
!=== 内部向け引数振り分けサブルーチン
!
! BuildArgTable で設定された argind_count, argstr_table を
! 用い, cmd_argv_list, cmd_opts_list を設定します.
!
! 既に一度でも呼ばれている場合, 何もせずに終了します.
!
use dc_types, only: STRING
implicit none
character(STRING):: raw_arg, name, value
integer:: i, cmd_argv_count, cmd_opts_count, cmd_argv_max, cmd_opts_max
continue
if (allocated(cmd_opts_list)) return
cmd_argv_count = 0
cmd_opts_count = 0
check_count: do, i = 1, argind_count
raw_arg = argstr_table(i)
if (DCOptionFormC(raw_arg, name, value)) then
cmd_opts_count = cmd_opts_count + 1
else
cmd_argv_count = cmd_argv_count + 1
end if
end do check_count
cmd_argv_max = cmd_argv_count
cmd_opts_max = cmd_opts_count
allocate(cmd_argv_list(cmd_argv_max))
allocate(cmd_opts_list(cmd_opts_max))
cmd_argv_count = 0
cmd_opts_count = 0
arg_get : do, i = 1, argind_count
raw_arg = argstr_table(i)
if (DCOptionFormC(raw_arg, name, value)) then
cmd_opts_count = cmd_opts_count + 1
cmd_opts_list(cmd_opts_count) % name = name
cmd_opts_list(cmd_opts_count) % value = value
cmd_opts_list(cmd_opts_count) % flag_called = .false.
else
cmd_argv_count = cmd_argv_count + 1
cmd_argv_list(cmd_argv_count) = raw_arg
end if
end do arg_get
end subroutine SortArgTable
subroutine BuildArgTable
!
!=== 内部向け引数処理サブルーチン
!
! モジュール sysdep の sysdep#SysdepArgCount, sysdep#ArgGet
! を呼び出し, その内容を argind_count と argstr_table に格納します.
!
! 既に一度でも呼ばれている場合, 何もせずに終了します.
!
use sysdep, only: SysdepArgCount, SysdepArgGet
use dc_types, only: STRING
implicit none
integer:: i, narg, nargmax
character(len = STRING):: value
character(len = STRING), allocatable:: localtab(:)
continue
if (argind_count >= 0) return
nargmax = SysdepArgCount()
allocate(localtab(nargmax))
narg = 0
do, i = 1, nargmax
call SysdepArgGet(i, value)
narg = narg + 1
localtab(narg) = value
enddo
argind_count = narg
allocate(argstr_table(narg))
argstr_table(1: narg) = localtab(1: narg)
deallocate(localtab)
end subroutine BuildArgTable
function DCOptionFormC(argument, name, value) result(result)
!
! 引数としてで得られた文字列を *argument* に渡すことで,
! それがオプションなのかそうでないのかを判別し, もしも
! オプションと判別した場合には戻り値に .true. を返し,
! name にオプション名, *value* にその値を返す.
! オプションに値が付加されない場合は *value* には空白を返す.
!
! オプションではない場合は戻り値に .false. を返し,
! *name*, *value* には空白を返す.
!
! オプションと判定されるのは以下の場合です.
!
! * 一文字目が '-' の場合. この場合は短いオプションとなり, '-'
! の次の一文字のみがオプションとして有効になります.
!
! * 1-2文字目が '--' の場合. この場合は長いオプションとなり,
! '--' 以降の文字列がオプションとして有効になります.
!
! オプションの値は, "=" よりも後ろの文字列になります.
!
!=== 例
!
! *argument* :: name, value, 返り値
! arg :: 空白, 空白, .false.
! -O :: -O, 空白, .true.
! -debug :: -d, 空白, .true.
! --debug :: --debug, 空白, .true.
! -I=/usr :: -I, /usr, .true.
! --include=/usr:: --include, /usr, .true.
!
implicit none
character(len = *), intent(in):: argument
character(len = *), intent(out):: name, value
logical :: result
integer:: equal
continue
equal = index(argument, '=')
if (argument(1:1) == '-' .and. argument(2:2) /= '-') then
! Short Option
if (equal == 0) then
name = argument(1:2)
value = ""
else
name = argument(1:2)
value = argument(equal+1: )
endif
result = .true.
elseif (argument(1:2) == '--') then
! Long Option
if (equal == 0) then
name = argument
value = ""
else
name = argument(1:equal-1)
value = argument(equal+1: )
endif
result = .true.
! elseif (equal == 0 .and. &
! & verify(argument(1:equal-1), WORDCHARS) == 0) then
! ! ???
! name = argument(1:equal-1)
! value = argument(equal+1: )
! result = .true.
else
! No Option (normal arguments)
name = ""
value = ""
result = .false.
endif
end function DCOptionFormC
end module dc_args