!= Configuration file for deepconv/arare 
! 
! Authors::   SUGIYAMA Ko-ichiro, ODAKA Masatsugu 
! Version::   $Id: density-current.conf,v 1.1 2014/07/08 01:19:01 sugiyama Exp $ 
! Tag Name::  $Name:  $ 
! Copyright:: Copyright (C) GFD Dennou Club, 2014. All rights reserved. 
! License::   See COPYRIGHT[link:COPYRIGHT] 
! 
! 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!  
 
 
&deepconv_main_nml 
  FlagTurbMethod = "ConstKm" 
/     
 
!!! 
!!!入出力ファイルに関する設定 
!!! 
&fileset_nml 
  FileInstitution    = "sugiyama@gfd-dennou.org"   !ファイルを最終的に変更した人, 組織.  
/ 
 
&restartfileio_nml 
  InitialFile  = "density-current_128x1x16_std_std_ini.nc" 
  OutputFile   = "density-current_128x1x16_std_std_res.nc" 
/ 
 
!!! 
!!!積分時間に関する設定 
!!! 
&timeset_nml 
  DelTimeLong   = 1.0d0       !長いタイムステップ 
  DelTimeShort  = 1.0d-1      !短いタイムステップ(音波関連項) 
  RestartTime   = 0.0d0       !計算開始時間 
  IntegPeriod   = 900.0d0     !積分時間  
  DelTimeOutput = 300.0d0     !出力時間間隔 
/ 
 
!!! 
!!!格子点数に関する設定 
!!! 
&gridset_nml 
  xdim = 128 
  ydim = 1 
  zdim = 16 
  ncmax = 1 
/ 
 
&axesset_nml 
  Xmax = 51.2d3 
  Ymax = 100.0d0 
  Zmax = 6.4d3 
/ 
 
!!! 
!!!実験パラメタ(物理・化学)の設定 
!!! 
&constants_nml 
  Grav       = 9.81d0,         !重力             [m/s] 
  PressBasis = 1.0d5,          !(温位の)基準圧力 [Pa] 
  TempSfc    = 300.0d0,        !地表面温度       [K] 
  PressSfc   = 1.0d5,          !地表面圧力       [Pa] 
  CpDry      = 1004.0d0,       !乾燥成分の比熱 
  MolWtDry   = 0.029d0,        !乾燥成分の分子量 
/ 
 
&dynamics_nml 
  FlagAdvection = "std"
  FlagAcousticmode = "std"
  FactorDExnerDtAdv = 0.0d0 
  FactorDExnerDtExpnd = 0.0d0 
  AlphaNDiff = 0.0d0  !数値拡散項の係数 
/ 
 
 
&turbulence_constKm_nml 
  ConstKm = 75.0d0, 
  ConstKh = 75.0d0, 
/ 
 
&damping_nml 
/ 
 
&composition_nml 
  SpcWetSymbol(1)  = 'H2O-g',  !湿潤成分 
  SpcWetMolFr(1)   = 0.0d0,  !湿潤成分の存在度(モル比) 
/ 
 
!!! 
!!! データ出力の全体設定 
!!! 
&gtool_historyauto_nml 
! AllOutput = .true. 
  FilePrefix   = "density-current_128x1x16_std_std_" 
  IntValue = 100.0,              ! 出力間隔の数値 
  IntUnit = 'sec',            ! 出力間隔の単位 
/ 
! 
! データ出力の個別設定 
! 
&gtool_historyauto_nml 
!  Name = 'PTemp, VelX, VelY, VelZ, Exner, Km, PTempAll, ExnerAll',   ! 出力変数 
  Name = 'PTemp',  
  IntUnit = 'sec',                               ! 出力間隔の単位 
/ 
 
 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!  
!!! 
!!! 初期値を作るための情報.  
!!!   初期値作成ルーチンでのみ使う変数をまとめる 
!!! 
&initialdata_nml 
  FlagBasic = "Dry",  
  FlagDisturbPTemp = "CosXZ" 
/ 
 
&initialdata_disturb_cos_nml 
  PTempMax     = -15.0d0,     !温位擾乱の最大値 
  Xc           = 25.6d3,      !擾乱の中心位置(水平方向) [m] 
  Xr           = 4.0d3,       !擾乱の半径(水平方向) [m] 
  Yc           = 25.6d3,      !擾乱の中心位置(水平方向) [m] 
  Yr           = 4.0d3,       !擾乱の半径(水平方向) [m] 
  Zc           = 3.0d3,       !擾乱の中心位置(鉛直方向) [m] 
  Zr           = 2.0d3,       !擾乱の半径(鉛直方向) [m] 
/ 
 
&initialdata_basic_nml 
   Humidity = 0.0d0, 
/ 
